7.6.  Docking window "3D History"
7.6.2. Possible features in the docking window "3D History"
Prev  Next

7.6.2. Possible features in the docking window "3D History"

7.6.2.1. Fixed plane
7.6.2.2. Reference Plane
7.6.2.2.1. Create reference planes via 3D History
7.6.2.2.2. Type "Plane with distance"
7.6.2.2.3. Type "Plane with rotation"
7.6.2.2.4. Type "Plane from coordinates"
7.6.2.2.5. Create reference plane via 3D view
7.6.2.3. Sketch
7.6.2.4. 2D drawing
7.6.2.5. Base extrude / Base rotate
7.6.2.5.1. Extrude...
7.6.2.5.2. Rotate...
7.6.2.6. Cut extrude / Cut rotate
7.6.2.6.1. Extrude...
7.6.2.6.2. Rotate...
7.6.2.7. Sweep base / Sweep cut
7.6.2.7.1. Sweep between two parallel planes (standard variant)
7.6.2.7.2. Create sweep between nonparallel planes
7.6.2.7.3. Create sweep with Guide curve
7.6.2.7.3.1. Variant 1: Initially created by guiding sketch only
7.6.2.7.3.2. Variant 2: Guide curve and cross-sectional sketch separately created
7.6.2.7.4. More notes
7.6.2.8. Grp Pattern / Pattern
7.6.2.8.1. Pattern wizard
7.6.2.8.2. Create pattern manually
7.6.2.8.2.1. Create pattern with linear alignment
7.6.2.8.2.2. Create rotated pattern
7.6.2.8.2.3. Irregular patterns
7.6.2.8.2.4. Using face attributes for patterns
7.6.2.9. Pipe
7.6.2.9.1. Creating a new pipe
7.6.2.9.2. Pipe editing/creation dialog
7.6.2.9.2.1. Pipe Name
7.6.2.9.2.2. Initial cross section
7.6.2.9.2.3. Elements
7.6.2.9.2.3.1. "Extrusion" element
7.6.2.9.2.3.2. "Smooth bend" element
7.6.2.9.2.3.3. "Sharp bend" element
7.6.2.9.2.3.4. "Cross section change" element (Sweep)
7.6.2.9.2.3.5. "Branch" element
7.6.2.9.2.4. Condition
7.6.2.9.2.5. Minimum rasterization
7.6.2.9.3. Preview
7.6.2.9.4. Context menu commands
7.6.2.10. Blend (Insert Chamfer/Fillet...)
7.6.2.10.1. What is the purpose of the Blend Feature
7.6.2.10.2. What is NOT the purpose of the Blend Feature
7.6.2.10.3. Basics - Create chamfer or fillet
7.6.2.10.4. General tips & notes
7.6.2.10.5. What should be considered
7.6.2.10.5.1. All blends, whose edges meet, have to be made as one blend
7.6.2.10.5.2. Blends in pattern
7.6.2.10.5.3. Tangent continuous
7.6.2.10.5.4. Preview presentation and Edge visualization for Chamfer/Fillet
7.6.2.10.5.5. Face selection
7.6.2.10.5.6. Combination of Sweep and Blend
7.6.2.10.5.7. Depiction of Chamfer/Fillet in different CAD systems
7.6.2.10.6. Not supported installation situations
7.6.2.10.6.1. Function "Generate sketch on selected face" needs at least one edge without Blend
7.6.2.10.6.2. Several intersecting chamfers/fillets and Blend feature in addition
7.6.2.10.6.3. Edges resulting from Blends
7.6.2.10.6.4. Maximum radius of Chamfer/Fillet
7.6.2.10.6.5. Blends whose edges meet with different size each
7.6.2.10.6.6. Combination of a fillet and a chamfer
7.6.2.10.6.7. Radius of chamfer/fillet larger than distance to adjoining geometry
7.6.2.11. Text Feature
7.6.2.12. Texture label
7.6.2.13. Drill Feature

The following elements may occur in the docking window "3D History". Often calling can happen at different places (e.g. via context menu command on elements of the 3D History or 3D view, just as well via toolbar icons).

Prev Up Next
7.6.1. What are Features?  Home 7.6.2.1.  Fixed plane