2.3. CAD specific information
2.3.6.  Inventor Integration - Administration
Prev  Next

2.3.6.  Inventor Integration - Administration

2.3.6.1. Block [CreationOptions(is3d)]
2.3.6.1.1. Key "poolpath" - Set storage path for PARTsolutions parts
2.3.6.1.2. Key "FileName" - Define structure of document name
2.3.6.1.3. Key "TemplateFile" - Adjust templates
2.3.6.1.4. Key "CreateIMates"
2.3.6.1.5. Keys "catalogparts" and "catalogparts(rawmaterials)"
2.3.6.1.6. Key "BomStructureType"
2.3.6.1.7. Key "MATERIAL_DEFAULT_APPEARANCE"
2.3.6.1.8. Key "Material" - Material mapping
2.3.6.1.9. Key "ThreadGroupRx_xx" - Thread configuration
2.3.6.2. Block [UI] - Adjust menus and toolbars
2.3.6.3. Attribute mapping in Inventor
2.3.6.3.1. Block [AttributeMapping(is3d)] - Set attribute language
2.3.6.3.1.1. Declare prefix for PARTsolutions attribute
2.3.6.3.2. Block [CadDocumentAttributes] - Transfer user defined attributes
2.3.6.3.3. Block [DocumentInformation]
2.3.6.3.4. Block [SummaryInformation]
2.3.6.3.5. Block [DesignTracking]
2.3.6.4. Several Inventor versions in parallel operation
2.3.6.5. User documentation

In the configuration file ifadeskinv.cfg you will find all the setting options for the Inventor integration.

The most important information is found in the single blocks and keys, in the configuration file itself.

Below you will find more detailed information on individual blocks and keys.

Syntax and basic concepts are explained at Section 2.2, “Cross-CAD information ”.

[Note]Note

Changes to configuration files should only be made by experienced users or CADENAS consultants.

Prev Up Next
2.3.5.7. User documentation Home 2.3.6.1. Block [CreationOptions(is3d)]