5.9.1. Overview on tabbed pages

	Note
The number of displayed tabbed pages depends on different factors: Selected level (catalog, directory, project) Project type (selected in the General menu item) License Config setting In the following an overview is given, when which tabbed pages are shown. After this the following chapters give details on the single tabbed pages.

Note

The number of displayed tabbed pages depends on different factors:

In the following an overview is given, when which tabbed pages are shown.

After this the following chapters give details on the single tabbed pages.

Comprehensive tab pages (at directory level)

General: The General menu item is always displayed, although the individual input lines vary depending on the selected level and project type.
Catalog help: A catalog help can be created at any level.
Translation: Translations can be made at any level.
Media Variable [Media variable]: On the Media Variable [Media variable] tab page (up to V11 "Documents") you can manage media variables. These can be created for various purposes(PARTtemplateDesigner[3D PDF data sheet function], print projects, wizards, product configurators, PARTcommunity [e.g. additional tooltip information]).
Image: Image import and image processing (at catalog and directory level)
History: Concerns quality control at PARTprojectQA.
For details, see Chapter 6, PARTproject QA.
Catalog spl [Catalog separation]itting: Function to create several sub-catalogs from a central catalog
The tab page is only visible after activating a corresponding config key. See Section 5.9.20, “Tabbed page: Catalog spl itting ”.

Generally displayed at project level Tab pages:

General: The General menu item is always displayed, although the individual input lines vary depending on the selected level and project type.

Note

Information for existing customers:

With V12, you will find the various classifications on a separate Classification tab page and no longer as a sub-item of the General tab page.
Furthermore there are some new additional functions such as classifying via templates, for example.

QA check: Affects the quality control at PARTproject QA (project level), displayed if "Activate QA" is activated under Extras -> Settings [Preferences...]... "Activate QA [Activate QA] " is activated. See Chapter 6, PARTproject QA.

Special tab pages (at project level depending on the project type)

Project type 2D project
-> Tab page: 2D project
Project type 2D-Partshell [2D shell]
-> Tab page: 2D project
Project type 3D project
-> Tab page: Views
Project type 3D rolling bearing
-> Register pages: Rolling bearings, 2D derivation
Project type 2D/3D project
-> Tab pages: 2D project, Views
Project type 2D / 3D rolling bearings
-> Tab pages: 2D project, Rolling bearings
Project type Assembly-Configuration [Assembly configuration]
-> Tab page: Assembly, 2D derivation
Project type Assembly template
-> Tab page: Assembly, 2D derivation
Project type Assembly table
-> Tab page: Variable assignment, references [Links]
Project type PartMedia
Documentation for this is not part of this manual
Project type Document project [Project documentation]
-> Tab page: Document
Project type Without geometry
-> Tab page: Bitmaps
Project type Assistant
no further tabbed pages
Project type Search assistant [Search Assistant]
-> Bitmapstab page
Project type Filter wizard [Filter Assistant]
-> Bitmapstab page
Project type Calculation wizard [Calculation Assistant]
-> Bitmapstab page
Project type Simple-Assembly [Simple assembly]
-> Tab page Bitmaps, 2D derivation, QA check

Prev	Up	Next
5.9. Settings	Home	5.9.2. Tabbed page: General