3.1.9.3.1. BMP GIF JPEG PNG TIFF

You can export the part displayed in the part view in several image formats.

The export dialog boxes of BMP, GIF, JPEG, PNG and TIFF format are nearly identic, the differences are marked.

BMP:"Attributes [Attributes]" tab page
GIF:"Attributes [Attributes]" tab page
JPEG:"Attributes [Attributes]" tab page
PNG:"Attributes [Attributes]" tab page
TIFF:"Attributes [Attributes]" tab page,"Tiff options [Tiff options]" tab page

Attributes tab page

Attributes " tab page (PNG format as an example)

Selection:
You can export all the views listed or only those that are specifically activated. Select a mode:
- All Views
  - Window
    Window (3D-View)
    Window (Technical view (2D))
  - Active document
  - 2D derivation (...)
    Different derivations such as "3 views + isometric drawing in frame (DIN)" or "Right" for example.
  - Technical view
    Different technical views such as "Front view" for example
Size:
- Picture size
  The following options are available for specifying the image size [Picture size]:
  - Fixed sizes (e.g. 100x100). The specification is made in pixel.
  - STANDARD: The currently set size from the 3D view [Model Viewer] is used.
  - Freely defined [Free defined]: Define the image dimensions yourself in the Width in pixels and Height in pixels input fields.
- Width / Height (The fields are activated if the option Freely defined [Free defined] has been selected under Image size [Picture size] )
- DPI: Print resolution (only for BMP, JPEG, PNG, TIFF)
Picture options
- Transparent background
- 3D settings [3D Options]:
  - Current view
  - -PARTsolutions 8.1-
  - -PARTsolutions 9.0-
  - Purist
  - etc.
- 2D derivation view:
  - Line representation [Line view]:
    
    Line view
  - Lines + shaded representation [Lines + shaded view]:
    
    Lines + shaded view
    
    Combination of line view and shaded view
  - Shaded view [Shaded View]:
    
    Shaded view
  Detailed information on this is found under Section 3.1.10.1.2.1, “ Render mode ”.
- Shortened [2D shortened view] 2D view:
  Precondition for the use is that the respective option is provided by the manufacturer.
  Advantageously for overlong parts. The shortened part will also display the real dimensionings.
  
  Result after export with option "Shortened 2D view [2D shortened view] " deactivated
  
  Result after export with "Shortened 2D view [2D shortened view] " option activated
Target file [Destination file]:
Use Browse ... to specify the target file.
Optionally activate the Open directory after export (once) [Open directory after export(once)] checkbox.

Tiff options tabbed page (only at TIFF)

Color format: RGB or CYMK
Compression: Non-compressed [Not compressed] and different compression variants

Prev	Up	Next
3.1.9.3. Export graphic formats	Home	3.1.9.3.2. Animated GIF