Allplan 3D

Views tabbed page

ArchiCAD 19 GSM

In order to use this export format ArchiCAD has to be installed.

Filter (Geometry) tabbed page

ArchiCAD 19 GSM Mesh

In order to use this export format ArchiCAD has to be installed.

Views tabbed page

ArchiCAD 19 GSM Parametric

In order to use this export format ArchiCAD has to be installed.

Filter (Geometry) tabbed page

ArchiCAD GDL Script

This format can be used without ArchiCAD installation.

Filter (Geometry) tabbed page

ArchiCAD GDL Script Mesh

This format can be used without ArchiCAD installation.

Views tabbed page

AutoCAD DWG 3D

In order to use this export format ArchiCAD has to be installed.

Filter (Geometry) tabbed page, Export options tabbed page -> Insertion position, Options

AutoCAD DWG Mesh

Views tabbed page, Export options tabbed page -> Insertion position, Options

Autodesk Inventor

Filter (Geometry) tabbed page

Autodesk Revit

Filter (Geometry) tabbed page, Autodesk Revit tabbed page

CATIA V4 IUA Macro 3D

Filter (Geometry) tabbed page

CATIA V5 CATscript Macro 3D

Filter (Geometry) tabbed page, Export options tabbed page

CATIA V6 CATscript Macro 3D

Filter (Geometry) tabbed page, Export options tabbed page

CATIA V5 Offline Interface

Filter (Geometry) tabbed page

Creo Elements/Direct (CoCreate Modeling)

Filter (Geometry) tabbed page, Export options tabbed page

Creo Elements Pro 5.0

Filter (Geometry) tabbed page

Creo Parametric 1.0, 2.0, 3.0 each 32 or 64 bit

Filter (Geometry) tabbed page, Creo Parametric tabbed page

Fides Macro 3D

Filter (Geometry) tabbed page

IFC Macro 3D

Most important export format for BIM (Building Information Modeling), which can be read by many CAD programs established in prefabricated construction or building sector.

Filter (Geometry) tabbed page

IFC Mesh 3D

Most important export format for BIM (Building Information Modeling), which can be read by many CAD programs established in prefabricated construction or building sector.

Views tabbed page

MicroStation 3D

Filter (Geometry) tabbed page, Export options tabbed page -> Insertion position, Options

MicroStation Mesh

Views tabbed page, Export options tabbed page -> Insertion position, Options

NX

Filter (Geometry) tabbed page, NX tabbed page

PDMS Macro 3D

Filter (Geometry) tabbed page

SketchUp

Views tabbed page

Solid Edge

Filter (Geometry) tabbed page

SolidWorks

Filter (Geometry) tabbed page

SolidWorks Macro 3D

Filter (Geometry) tabbed page

SpaceClaim

Filter (Geometry) tabbed page, SpaceClaim tabbed page

Tribon Macro 3D

Filter (Geometry) tabbed page

VDI3805 Macro 3D

Filter (Geometry) tabbed page

VDI3805 Parametric Macro 3D

Filter (Geometry) tabbed page, Export options

Visi-CAD

Filter (Geometry) tabbed page

DXF 3D

Filter (Geometry) tabbed page, Export options tabbed page

DXF Binary 3D

Filter (Geometry) tabbed page, Export options tabbed page

DXF Binary Mesh

Views tabbed page, Export options tabbed page

DXF Mesh

Views tabbed page, Export options tabbed page

IGES/IGES 3D

Note IGES = Parasolid modeling kernel IGES 3D = ACIS modeling kernel Generally, only IGES should be used. From time to time it may happen that parts will throw an error when exported to IGES. For bridging IGES 3D can be used until the part has been corrected and released.

JT

Export options -> Export accuracy, Cross-section tabbed page

JT Mesh

Views tabbed page

PARASOLID XB

Filter (Geometry) tabbed page

PARASOLID XT

Filter (Geometry) tabbed page

SAB

SAT/SAT 3D

Note SAT = Parasolid modeling kernel SAT 3D = ACIS modeling kernel Generally, only SAT should be used. From time to time it may happen that parts will throw an error when exported to SAT. For bridging SAT 3D can be used until the part has been corrected and released.

STEP 3D/STEP

Note STEP = Parasolid modeling kernel STEP 3D = ACIS modeling kernel Generally, only STEP should be used. From time to time it may happen that parts will throw an error when exported to STEP (see following exemplary figure). Then for bridging STEP 3D can be used until the part has been corrected and released. On PARTcommunity portals the error can only be recognized by the error message "Part cannot be generated in STEP format". In this case a test export from PARTdatamanager should be made. IMPORTANT: the numerical code at the end of the error message may differ from above figure depending on specific problem (e.g. Cut, Extrude, additional body, etc.).

STL: All is merged to one part

Tabbed page Export options -> Export accuracy, tabbed page Cross-section, tabbed page Transformation

STL (reduced): All is merged to one part, number of triangles reduced

Export options tabbed page-> Export accuracy, Cross-section tabbed page, Transformation tabbed page, Reduction tabbed page

STL 3D (Multipart): Each part separately contained in STL

Export options tabbed page -> Export accuracy, Cross-section tabbed page, Transformation tabbed page

VRML 3D

Export options tabbed page -> Export accuracy tabbed page, Cross-section, Transformation tabbed page