Catch everything [Zoom all]

The component is displayed centered in the 3D view.

Transparency

Settings for the transparent display of the component.

Animation

Shows the component in a rotating animation.

Fairs [Measure]

Opens the measuring tool.

Display measuring grid [Show measuring grid]

Shows the external dimensions in the 3D view.

Define cutting plane... [Define section cut...]

A sectional view can be displayed, which can be drawn through the component as required using a coordinate system.

Views

The component can be displayed from the front view [Front view], rear view [Rear view], right view [Right view], left view [Left view], top view [Top view] or bottom view [Bottom view].

Isometric view

Shows the component in the isometric view.

Create new sketch on marked area [Generate sketch on selected face]

Creates a new sketch on the selected area. Further information on the function can be found here: "Create new sketch on selected surface" function requires at least one edge without a blend

Create new layer on marked area [Create plane on selected Face]

Creates a new layer on the selected area.

Create new text on selected area [Generate text on selected face]

Creates a text that is attached as geometry in or on the component. You can find a detailed description of the function here: Text feature

Texture label

Creates a texture on the component. You can find a detailed description of the function here: Texture Label

Paste copied sketch [Paste sketch]

Inserts a sketch from the clipboard on the flat surface.

Set center of rotation [Set rotation center]

Sets the center of rotation to the selected position.

Create hole on marked area [Create drill on selected surface]

Creates a drill hole on the selected surface. Here you will find a detailed description of the function: Drill Feature

Area attributes [Face attributes]

Area attributes can be displayed & created / edited. Here you will find a detailed description of the function: Area attributes

Visible in this configuration

Hides the component. Here you can find further information on the function: Level of detail

Edit creating elements

Displays various options for the original surfaces in order to change them. Here you will find detailed information on the basic functions: Extrude / Rotate / Edit

Create new chamfer/rounding... [New Chamfer/Fillet...]

Creates a new chamfer or rounding on the selected surface. You can find a detailed description of the function here: Create rounding or chamfer

Area attributes [Face attributes]

Area attributes can be displayed & created / edited. Here you will find a detailed description of the function: Area attributes

Edit creating elements

Allows you to edit the basic areas. Here you will find detailed information on the basic functions: Extrude / Rotate / Edit

Tangential plane

Creates a plane on a rounded shape. You can find a detailed description of the function here: Tangential plane

Texture label

Creates a texture on the component. You can find a detailed description of the function here: Texture Label

Create new chamfer/rounding... [New Chamfer/Fillet...]

Creates a new chamfer or rounding on the selected surface. You can find a detailed description of the function here: Create rounding or chamfer

Area attributes [Face attributes]

Area attributes can be displayed & created / edited. Here you will find a detailed description of the function: Area attributes

Edit creating elements

Allows you to edit the basic areas. Here you will find detailed information on the basic functions: Extrude / Rotate / Edit

Create new chamfer/rounding... [New Chamfer/Fillet...]

Creates a new chamfer or rounding on the selected surface.