12.2.3. Context menu and buttons "2D view" window

12.2. Create 2D derivation 12.2.3. Context menu and buttons "2D view" window
Prev	Next

All commands in the window can both be executed via context menu or via buttons. A click with the secondary mouse button into the window, opens the corresponding context menu.

The commands Zoom all, Undo zoom (=Zoom all), Zoom on window (Zoom view on rectangular clipping), Zoom in/out and Pan are explained under Section 3.1.19.6.2.1, “Overview” in PARTsolutions - User manual.

Choose insertion point

If you want to reappoint the insertion point for a part, select Choose insertion point.

Everywhere placement of such a point is possible, a circle symbol shows up during mouseover. By clicking on the circle, the insertion point is fixated. A green triangle marks the insertion point.

Show coordinate system

Via Show coordinate system a ruler is inserted horizontally and vertically in the 2D view.
Print
Print starts the window for the print job.
Dimensioning mode

After clicking on the respective button or context menu command the dimensioning toolbar is displayed in addition.

Note
The dimensioning mode is only available for the individual views Front, Back, Right, Left, Top, Bottom, Isometric and Current.

Detailed information on the dimensioning mode can be found under Section 7.9.3.14.3, “ Attributes -> Dimensioning mode ”.

Prev	Up	Next
12.2.2.6. Transfer special derivations or technical views to CAD system	Home	Chapter 13. FAQ