3.3.7. NX Integration - Administration
3.3.7.2. Block [CreationOptions(is3d)]
Zurück
Weiter
3.3.7.2. Block [CreationOptions(is3d)]
3.3.7.2.1. Key "Poolpath"
3.3.7.2.2. Key "FileName"
3.3.7.2.3. Key "EnableMCD" - Mechatronic Concept Designer
3.3.7.2.4. Key "material"
3.3.7.2.5. Keys "feature_group_xx"
3.3.7.2.6. Keys "layer_xx" - Layer Beschreibungen
3.3.7.2.7. Key "PhysicalPropertiesMode"
3.3.7.2.8. Key "PipingConnPoint" - NX Routing Funktion
3.3.7.2.8.1. Weitere NX Routing Optionen
3.3.7.2.9. Key "MakeSketchesInternal"
