3.3.8.3.3. Logo

3.3.8.3. "Environment" tabbed page 3.3.8.3.3. Logo
Prev	Next

Using the checkbox you can turn the logo on and off.
With Browse ... you adjust the desired logo.
Size (in percent of entire face)
Transparency: (100% is invisible)
Scale
Via Scale you control the calculation mode for the logo size.
- Window vertical
  The logo size is calculated from window height.
- Window horizontal
  The logo size is calculated from window width.
- Smaller of vertical/horizontal
  The logo size is calculated from the smaller window height and width.
- Larger of vertical/horizontal
  The logo size is calculated from the larger window height and width.
Corner
You can assign a reference point for the positioning of a corner or central point.
Distance type
The selection under Distance type controls the reference value of Distance corner horizontal and Distance corner vertical. This is helpful for logos with large deviations of height and width.
- Window size
  The vertical distance is calculated via the window height and the horizontal distance over the window width.
- Logo size X and Y
  The vertical distance is calculated via the logo height and the horizontal distance over the logo width.
- Logo size X
  The vertical as well as the horizontal distance are calculate from the logo width.
- Logo size Y
  The vertical as well as the horizontal distance are calculated from logo height.
Distance corner horizontal
Distance corner vertical

Prev	Up	Next
3.3.8.3.2. Background texture	Home	3.3.8.3.4. Environment sphere