3.3. CAD specific information
3.3.4.  CATIA V5
Prev  Next

3.3.4.  CATIA V5

3.3.4.1. Block [INTERFACE]
3.3.4.1.1. Key "insertComponentFlexible" (FLEXIBLE_RIGID_SUBASSEMBLY)
3.3.4.1.2. Key "DEBUG"
3.3.4.1.3. Key "NativeCheckoutTargetFolder"
3.3.4.2. Block [CreationOptions]
3.3.4.2.1. Key "FileName(is3dPart)"
3.3.4.2.2. Key "FileName(is3dAsm)"
3.3.4.2.3. Key "TemplateName(is3dPart)"
3.3.4.2.4. Key "TemplateName(is3dAsm)"
3.3.4.2.5. Key "poolPath"
3.3.4.2.6. Key "MaterialFile"
3.3.4.2.7. Key "Material"
3.3.4.2.8. Key "APPLY_PART_MATERIAL_TO"
3.3.4.2.9. Key "CREATE_THREADS"
3.3.4.2.10. Key "COLOR_FEATURES_00"
3.3.4.2.11. Key "SimplifyAssemblies"
3.3.4.2.12. Key "SKIP_ERRORS"
3.3.4.2.13. Key "CREATE_COMPONENTS"
3.3.4.2.14. Key "CREATE_SOLIDS"
3.3.4.2.15. Key "LOAD_CGR"
3.3.4.2.16. Key "CREATE_AUTO_CST_SKETCH"
3.3.4.2.17. Key "SAVE_DOCUMENT_TYPE"
3.3.4.2.18. Key "CREATE_CGR"
3.3.4.2.19. Key "UseAsmMates"
3.3.4.3. Block [AttributeMapping]
3.3.4.4. Block [CATPartParameters]
3.3.4.5. Block [CATCompProperties]
3.3.4.5.1. Key "CATPRODUCT_INSTANCENAME"
3.3.4.6. Block [CATProdProperties]
3.3.4.6.1. Key "CATPRODUCT_PARTNUMBER"
3.3.4.7. Commands for adjusting the behavior/visibility of the 3Dfindit interface Menu and Workbench
3.3.4.8. Assembly/PART Dimensions for Catia
[Note]Note

CATIA V5 interface is available on request.

In the configuration file ifcatia.cfg (ifcatia_start.cfg), you will find all the settings for CATIA V5 integration.

The most important information is found in the single blocks and keys, in the configuration file itself.

Below you will find further information on individual blocks and keys.

Syntax and essential concepts can be found at Section 3.2, “Cross-CAD information ”.

[Note]Note

Changes to configuration files should only be made by experienced users or CADENAS Consulting.

Prev Up Next
3.3.3.2.1.  Geometric search (3D): Conversion to STL Home 3.3.4.1. Block [INTERFACE]