2.3. CAD specific information
2.3.7.  NX Integration - Administration
Prev  Next

2.3.7.  NX Integration - Administration

2.3.7.1. Activation / deactivation of the integration
2.3.7.2. Block [CreationOptions(is3d)]
2.3.7.2.1. Key "Poolpath"
2.3.7.2.2. Key "FileName"
2.3.7.2.3. Key "EnableMCD" - Mechatronic Concept Designer
2.3.7.2.4. Key "material"
2.3.7.2.5. Keys "feature_group_xx"
2.3.7.2.6. Keys "layer_xx" - Layer descriptions
2.3.7.2.7. Key "PhysicalPropertiesMode"
2.3.7.2.8. Key "PipingConnPoint" - NX routing function
2.3.7.2.8.1. More NX Routing options
2.3.7.2.9. Key "MakeSketchesInternal"
2.3.7.3. Block [INTERFACE]
2.3.7.3.1. Key "PhysicalPropertiesPrecision" - Allow physical property precision override
2.3.7.3.2. Key "ForceCreateNew3DPreviews"
2.3.7.4. Block [UI] - Adjust menus and toolbars
2.3.7.4.1. Key "PrepareMenuPath"
2.3.7.5. Block [AttributeMapping(is3d)]
2.3.7.5.1. Key "Attr_CopyFrom_01"
2.3.7.6. Block [CadDocumentAttributes]
2.3.7.6.1. Add categories to attribute mapping
2.3.7.7. NX: Unicode support in filenames
2.3.7.8. NX: "Position Override" functionality
2.3.7.9. NX: Adjust placement dialog via macro
2.3.7.9.1. Procedure when using NX without PDM
2.3.7.9.2. Procedure when using NX with Teamcenter
2.3.7.10. NX: Macro independent placement dialog
2.3.7.11. Export STEPAP242, JTAP2422 and PLMXML
2.3.7.12. NX: Export with topology information
2.3.7.13. NX Teamcenter: Component is Reference-Only
2.3.7.14. Troubleshooting
2.3.7.14.1. Broken constraints after replacing part in assembly
2.3.7.14.2. Export NATIVE STP to NX fails
2.3.7.14.3. Installation - Deinstallation
2.3.7.15. User documentation
2.3.7.16. siemenspsol.cfg
2.3.7.16.1. Reuse Library - CADENAS Library - Setting options

All settings for NX integration can be found in the configuration file ifugnx.cfg.

The most important information is found in the single blocks and keys, in the configuration file itself.

Below you will find more detailed information on some blocks and conclusions.

Syntax and essential concepts can be found at Section 2.2, “Cross-CAD information ”.

[Note]Note

Changes to the configuration file should only be made by experienced users or CADENAS consultants.

Prev Up Next
2.3.6.5. User documentation Home 2.3.7.1. Activation / deactivation of the integration