4.7.7.4. Classimporter (9.03, 9.02, 9.00)
4.7.7.4.4. Apply units for parts (9.02)
Zurück  Weiter
4.7.7.4.4. Apply units for parts (9.02)

You can now apply which unit you the imported STLs are to have.

Unit: mm or INCH

Unit: mm or INCH

classimport.cfg:

[CLASSIMPORT]
UNIT=mm

Values: mm, INCH

Default: mm

Zurück Nach oben Weiter
4.7.7.4.3. Translatable text attributes (9.02) Zum Anfang 4.7.7.4.5. Check files (9.02)