2.10.2. Release Notes V11.00 SP3

2.10. V11.00 SP3 2.10.2. Release Notes V11.00 SP3
Zurück	Weiter

Issue #60345 (ENHANCEMENT): 2D Derivation Threads incorrect side view
Issue #82011 (ENHANCEMENT): Zoom 2D when docking/undocking/rescale
Issue #92185 (ENHANCEMENT): Add flag for "inverted" parts list. Headers at the bottom and numbering from bottom to top
Issue #92617 (ENHANCEMENT): Disconnect signals when setting new ViewManager
Issue #91849 (PROBLEM): Width and height of text boxes get messed up, when using vertical texts
Issue #92051 (PROBLEM): Combination views - unable to move the drawing with a mouse
Issue #92399 (PROBLEM): Custom derivation from 3db is empty

Issue #91989 (ENHANCEMENT): Warning if duplicate NB of different part is used in one assembly variant
Issue #93287 (ENHANCEMENT): Missing proxy for AssMainC::rememberModelChange
Issue #87481 (PROBLEM): Part loads in v10 but not v11
Issue #93283 (PROBLEM): Error messages when opening norm\din\halbzeuge\lochplatten\din_24041_qg.prj
Issue #93581 (PROBLEM): Loading dme/d_m_e_euro/2/a/dme_standard/ff.prj is very slow

Issue #88927 (PROBLEM): Blend feature fails when angle of touching edges is not 90 degrees
Issue #89897 (PROBLEM): Dependencies with conditions are wrong when using blends
Issue #89905 (PROBLEM): Blend Edges between corner may lead to display garbage
Issue #90715 (PROBLEM): 3DB loading slow, maybe topology checks are done always, even if not needed
Issue #90895 (PROBLEM): Blend Feature may cut too much
Issue #90899 (PROBLEM): Blend Feature may not work symmetric in all cases
Issue #92701 (PROBLEM): Sweep problems with pattern origins on different edges of a rectangle
Issue #92871 (PROBLEM): PARTdesigner crashes while creating blend
Issue #93537 (PROBLEM): Crash during sketch calculation
Issue #93903 (PROBLEM): Incorrect blend calculation
Issue #93965 (PROBLEM): Cube can not be blended
Issue #94161 (PROBLEM): Part::GetPreviousHistory does not return previous history

Issue #68707 (ENHANCEMENT): Disable max zoom in PARTdataManager 3D view
Issue #85369 (ENHANCEMENT): Export of view materials in ZJV
Issue #85371 (ENHANCEMENT): Viewing Material Textures
Issue #85719 (ENHANCEMENT): Hotspots/Label export in ZJV (e.g. type labels)
Issue #90979 (ENHANCEMENT): 3D Dimensions - Differences in View of 3D and 2D
Issue #91249 (ENHANCEMENT): Naming of rotation types
Issue #94321 (ENHANCEMENT): Viewaxisup / front parameters are not used
Issue #72799 (PROBLEM): Circular Connection point pattern not fully displayed in PARTdataManager
Issue #85407 (PROBLEM): Cut axes are hard/impossible to grab when using default (left/right/front/...) views
Issue #87337 (PROBLEM): Graphical glitch when using blend feature
Issue #88701 (PROBLEM): Curious Error In Placement Dialog
Issue #89475 (PROBLEM): Cursor is wrong in some conditions after measure dialog is closed
Issue #89491 (PROBLEM): All edges full visible shading do not work
Issue #92781 (PROBLEM): Normalmap height seems to be inverted
Issue #93245 (PROBLEM): Caching of materials is problematic as modeller
Issue #93439 (PROBLEM): Some surfaces could not be selected for measuring
Issue #93599 (PROBLEM): STL File is not correct displayed
Issue #93911 (PROBLEM): Some dimensions are positioned wrong in SP3
Issue #94009 (PROBLEM): 3D Dimensions with Position ELEMENTOFFSET are not shown correct

Issue #56323 (ENHANCEMENT): Speedup CSV export
Issue #76557 (ENHANCEMENT): Document scan: remove native checkin mode
Issue #82599 (ENHANCEMENT): Duplicate analysis - duplicate mark buttons should be inactive on upper levels
Issue #85529 (ENHANCEMENT): Prefetch database data in CSV export
Issue #89325 (ENHANCEMENT): Use same name for "Manage analyses" in selection tree
Issue #93005 (ENHANCEMENT): Duplicate analysis - default search type "Geometric"
Issue #78939 (PROBLEM): duplicate analysis doesn't work with filters
Issue #94895 (PROBLEM): CSV Export of analysis not always correct when using multi threading / ignore duplicates

Issue #74553 (ENHANCEMENT): NetAdapter: Implement support for VT_RECORD
Issue #86647 (ENHANCEMENT): Create framework for wizards in VBS
Issue #65485 (PROBLEM): Crash in remote vbs engine call while attribute processing toExtAttrVar
Issue #93511 (PROBLEM): Function to find eClass values by varId without version

Issue #87603 (ENHANCEMENT): Set UserAgent of CEF by config entry
Issue #93035 (ENHANCEMENT): Open links of tooltips in HelpWidget
Issue #87755 (PROBLEM): Set accept language Header to PSOL language (CEF)
Issue #89505 (PROBLEM): Bowser widget does not respond to resize requests when a Url is loaded twice
Issue #91177 (PROBLEM): CEF: Proxy connection problem

Issue #88813 (ENHANCEMENT): Idea Management - Part comparison - Geometrical similarity of listed parts
Issue #88815 (ENHANCEMENT): Part Comparison - Drag 'n' Drop doesn't take over some information about the search result
Issue #90623 (ENHANCEMENT): Compare dialog show technical view should have information if nothing is chosen
Issue #90653 (ENHANCEMENT): Refactor, CodeCleanup: Improve deleting elements from TecPreview layout
Issue #85945 (PROBLEM): Manual alignment in part compare connects wrong planes
Issue #89563 (PROBLEM): Model matrix becomes corrupt after some manual rotation changes
Issue #93261 (PROBLEM): Positions of features incorrect in comparison
Issue #95035 (PROBLEM): Blue part gets pink after accepting the settings

Issue #90999 (ENHANCEMENT): progvideos not working
Issue #94789 (ENHANCEMENT): Parallel downloads option in online update
Issue #93601 (PROBLEM): Help - version not updated

Issue #74855 (ENHANCEMENT): Lines from topology tab in full text search look weird sometimes
Issue #77843 (ENHANCEMENT): Analysis: Speedup combined searches
Issue #93753 (ENHANCEMENT): Search result- summary doesn't show variable IDNR
Issue #89323 (PROBLEM): Show resolved ranges by default
Issue #91539 (PROBLEM): Searching a word which ends with AE finds also texts with A or Ä
Issue #92229 (PROBLEM): Add param for table filter
Issue #92231 (PROBLEM): Full-text search module returns fewer lines than the PARTdataManager
Issue #93175 (PROBLEM): auto complete doesn't work with NORM catalogs again
Issue #93635 (PROBLEM): Search for "100 mA" finds to much results
Issue #94273 (PROBLEM): Filtering a table on geosearch seems to reactivate the text search made before and give wrong search results

Issue #28871 (ENHANCEMENT): Make it possible to set unit for topo search via proxy
Issue #78739 (ENHANCEMENT): Extend unit test for feature recognition to Capvidia
Issue #82467 (ENHANCEMENT): Add rectangular holes to feature recognition
Issue #83413 (ENHANCEMENT): Partial search: Zoom to result
Issue #86395 (ENHANCEMENT): Topology Search feature - Find all elements fitting into a existing (bore)hole
Issue #87075 (ENHANCEMENT): Add patterns of rectangular holes to feature recognition
Issue #88197 (ENHANCEMENT): Improve performance of generation of linear index for geo search and entity index for partial search
Issue #89227 (ENHANCEMENT): Show matching surfaces in compare dialog after partial search
Issue #89419 (ENHANCEMENT): Remove 3rdparty lib fann
Issue #89621 (ENHANCEMENT): Geometry search - when there is no any load geometry option
Issue #89743 (ENHANCEMENT): Selection color in partial search
Issue #90621 (ENHANCEMENT): Compare dialog remove expert settings as own icon
Issue #92469 (ENHANCEMENT): Hide edit template for standard ISO installation
Issue #92485 (ENHANCEMENT): Read SampleData from GeoSearchObjekt
Issue #93181 (ENHANCEMENT): Selecting many features in topology information is very slow
Issue #94061 (ENHANCEMENT): Make configurable whether adjacent unknowns are merged or not in Capvidia zjv export
Issue #94149 (ENHANCEMENT): Allow to configure what features are found by fall-back for unknown cad faces
Issue #74717 (PROBLEM): Black background for 3d preview after unmachined search
Issue #86131 (PROBLEM): Search for unmachined parts - no results for INCH part
Issue #86841 (PROBLEM): Search for volumes and areas greater than 1e9 does not work
Issue #87741 (PROBLEM): Problem in Cone recognition with Capvidia
Issue #87779 (PROBLEM): Axis for spherical segments have strange values when using Capvidia
Issue #87823 (PROBLEM): Information in feature tooltip may be incorrect for assemblies
Issue #89255 (PROBLEM): When combining a variable search with a geo search, and there would be more than 1 result with the same line id, only one of these is shown
Issue #89383 (PROBLEM): ERP is not working with new topo search iterator
Issue #89495 (PROBLEM): Geo search results in mode "parts and part families" may be missing
Issue #89615 (PROBLEM): Option in ProE import options dialog is not translated in English
Issue #89937 (PROBLEM): Search for finished / unmachined parts in tree mode returns not as many results as expected
Issue #90201 (PROBLEM): Crash in image sementation dialog
Issue #91345 (PROBLEM): If projects have same class id, do not fingerprint them twice when creating geo index
Issue #92155 (PROBLEM): Problems when searching planes in partial search with different triangulations
Issue #92189 (PROBLEM): When searching for angles and the length unit is INCH, the angles are divided by 25.4
Issue #92339 (PROBLEM): When doing partial search from CAD use options from dialog (negativeFeature and interiorContours)
Issue #92363 (PROBLEM): Partial Search in CAD SE ST9 not working for conical cylinders
Issue #92559 (PROBLEM): Show feature types of selection in partial search dialog
Issue #92593 (PROBLEM): Fall-back implementation for feature recognition on unknown cad faces
Issue #92625 (PROBLEM): xDKI 2018: Load geometry using "Load file" option does not work with Creo prt
Issue #92873 (PROBLEM): Topology Search from CAD - error in Creo Elements Direct Modeling
Issue #93021 (PROBLEM): Search runs over "all native catalogs" in default, instead of "All catalogs and classifications"
Issue #93129 (PROBLEM): Strings not translated in image
Issue #93155 (PROBLEM): When adding more than one attribute of the same feature to topology variables in table, for only one of them values are displayed
Issue #93209 (PROBLEM): Geosearch (from CAD) has no cancel button (if a part from an ASM is selected)
Issue #93239 (PROBLEM): When AutoSearch = 0 in CadAssistant, show geo search dialog
Issue #93319 (PROBLEM): When geo index has changed, only reload if it is not locked
Issue #93329 (PROBLEM): Incorrect results when searching for planes in partial search
Issue #93605 (PROBLEM): Add tolerance for topo search from CAD
Issue #93931 (PROBLEM): Unit problems with TopoSearch from Cad
Issue #94025 (PROBLEM): Generated jt files visible in transvidia but not in psol
Issue #94351 (PROBLEM): Csv export of dynamic topo columns only working for columns also visible in search results
Issue #94357 (PROBLEM): Partial search for unknown features should be size-dependent
Issue #94633 (PROBLEM): Crashes when creating fingerprints
Issue #94817 (PROBLEM): When opening a result from partial search, the found features are not selected anymore

Issue #51635 (ENHANCEMENT): LOGviewer allow category selection by folder and file and function name
Issue #94525 (PROBLEM): Hard crash of plogviewer

Issue #89487 (PROBLEM): Help layout, resizing panes
Issue #89667 (PROBLEM): Help not functional if opened from additional dialog
Issue #93521 (PROBLEM): CAD crashes during exporting the part

Issue #93373 (PROBLEM): Resolve additional files variables

Issue #85859 (ENHANCEMENT): Update Web components for WebGL export format
Issue #87197 (ENHANCEMENT): Allow WebGLHTML export to use different Templates from VersionString
Issue #90501 (ENHANCEMENT): Assimp update to newest version
Issue #90725 (ENHANCEMENT): Rotation of mesh formats regarding VIEWAXISUP
Issue #66561 (PROBLEM): 3MF format cant be opened after export
Issue #88871 (PROBLEM): ZJV wrong dimension mapping variable
Issue #89671 (PROBLEM): Offline export - ZJV reduced has double extension for parts
Issue #94325 (PROBLEM): ZJV exports black when a color is given wrong

Issue #89889 (ENHANCEMENT): Autocad 2018 to OpenDWG Writer
Issue #90195 (ENHANCEMENT): Dimensions change (DWG import Microstation)

Issue #62393 (ENHANCEMENT): Put option to activate STEP processing into group box header
Issue #72905 (ENHANCEMENT): Q&S imported and converted into step project doesn't look like original step file
Issue #94435 (ENHANCEMENT): Update JT to the new version 9.0
Issue #66457 (PROBLEM): Bugs in feature recognition of Capvidia
Issue #89591 (PROBLEM): 2D Drawings being scaled down during download
Issue #90187 (PROBLEM): Offline CD - SAT export is not available with Acis license
Issue #90751 (PROBLEM): Wrong Matrix for some Parts Allow Mesh import for DWG/DXF/DGN important for BIM Data
Issue #94923 (PROBLEM): The parts of an assembly are placed on the origin when a file is converted from JT to STEP

Issue #72881 (ENHANCEMENT): AW-Lake - Adding a Website Link Into Their Custom PDF
Issue #90897 (ENHANCEMENT): Found no way to get my Deeplink as hyper link on the PDF
Issue #94851 (ENHANCEMENT): Automatic name creation of PDF file is wrong
Issue #94967 (ENHANCEMENT): Various PDF datasheets in multiple catalogs can't export PDF datasheet in v11
Issue #92031 (PROBLEM): Bold letters are not displayed on 3D-PDF

Issue #86487 (ENHANCEMENT): Use stage settings as default, other parameters as overwrite
Issue #86489 (ENHANCEMENT): Instability with some threads
Issue #86491 (ENHANCEMENT): Maxwell version handling
Issue #88003 (ENHANCEMENT): Integrate Maxwell SDK to 4.0.1
Issue #80941 (PROBLEM): Sometime Face materials are set to the wrong triangle
Issue #85841 (PROBLEM): Rendering: Geometry errors

Issue #64959 (ENHANCEMENT): Installer: Change Message box buttons to Retry and Ignore on NX path selection
Issue #93273 (PROBLEM): Installer Crashes if installation dir is Samba share and eC@t is selected

Issue #89231 (ENHANCEMENT): INSTALLER : PdmLoginService.def
Issue #89385 (ENHANCEMENT): INSTALLER : PdmProxies SapWebSvc
Issue #90781 (ENHANCEMENT): INSTALLER : Teamcenter Creo
Issue #91151 (ENHANCEMENT): Installer: Remove Catia for now
Issue #93313 (ENHANCEMENT): Remove PARTeditor
Issue #92697 (PROBLEM): Error in module docu_lang_indep while installing V11sp3 ISO
Issue #92771 (PROBLEM): Installer - SolidEdge ST10 needs to be moved after ST9
Issue #94239 (PROBLEM): Interface is not working on NX12
Issue #94389 (PROBLEM): NX 12 interface installer position
Issue #94813 (PROBLEM): Drop PLMSynchro as selectable PDM entry and install it on default PSOL installation

Issue #87799 (ENHANCEMENT): Remove sources from 3rd-party and link to support@cadenas.de
Issue #87805 (ENHANCEMENT): Exchange RFQ Beta Link with RFQ Live Link
Issue #90483 (ENHANCEMENT): Change backup functionality of Installer
Issue #36107 (PROBLEM): Windows 8 sorting and adding from apps
Issue #48761 (PROBLEM): Enable Chinese Traditional on Installer
Issue #89833 (PROBLEM): Size limit of PSOL ISO exceeded
Issue #91699 (PROBLEM): Error during installation for AutoCAD 2018 interface
Issue #91703 (PROBLEM): Files in sysinfo have wrong dates
Issue #94427 (PROBLEM): Cancel installation appears randomly without clicking on CANCEL
Issue #95077 (PROBLEM): psol_workstation.exe error after installation and restart

Issue #31543 (PROBLEM): Strategy for allowing table clicks - special case ERP-User (e.g. Festo catalog problem)
Issue #90995 (PROBLEM): Capvidia license on client needed if using psworker

Issue #54551 (ENHANCEMENT): Delay loading of history info in prjClass
Issue #64265 (ENHANCEMENT): Mark item in index tree according to displayed section
Issue #73759 (ENHANCEMENT): partdatacenter.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74111 (ENHANCEMENT): classimport.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74187 (ENHANCEMENT): geomsearch.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74533 (ENHANCEMENT): registerofflinecd.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74539 (ENHANCEMENT): Maybe rendermaterial.cfg could be improved for better usability in PARTconfig Editor V2
Issue #76825 (ENHANCEMENT): Create proxy of TableLineImageConfig for pcom
Issue #83977 (ENHANCEMENT): Create proxies for end of life (whole project and per line) for PCOM
Issue #85251 (ENHANCEMENT): Plugin for quality check from 3d preview (ZJV) needed
Issue #85563 (ENHANCEMENT): Useless scrollbars in 3rdparty licenses dialog
Issue #85933 (ENHANCEMENT): Add partnumber and type to PDF datasheet of valve terminals
Issue #86597 (ENHANCEMENT): Page is not scrolled to top inside help tooltip
Issue #86947 (ENHANCEMENT): ERP-Sessions for PARTcommunity
Issue #89657 (ENHANCEMENT): Add WORLD to the delivery country template
Issue #90007 (ENHANCEMENT): Add hint where to obtain LGPL sources
Issue #90963 (ENHANCEMENT): Change default settings of PSworker
Issue #91367 (ENHANCEMENT): Update of CEF on Installation media / Installation
Issue #93661 (ENHANCEMENT): Settings for keyboard and PC mouse will not be adopted to any preview window
Issue #95199 (ENHANCEMENT): table.rows.itemByIdnr in V11 doesn't work with v10 parameterformat
Issue #84259 (PROBLEM): Observe that changed copy flag is kept on packet build
Issue #88415 (PROBLEM): License and Copyright correction collecting issue
Issue #88417 (PROBLEM): Remove Squish qtbuildinhook
Issue #88427 (PROBLEM): Missing about entries
Issue #88439 (PROBLEM): Update bison to fix license issues
Issue #88875 (PROBLEM): Remove PARTstatistic from PARTsolutions Installation
Issue #89341 (PROBLEM): Odd position of undocked message window on multi monitor setups
Issue #91079 (PROBLEM): Unit in topology view + 3D view and after the import are not the same
Issue #91109 (PROBLEM): Import of inch part has wrong value in unit cm
Issue #91135 (PROBLEM): part of 1000 times too large after import
Issue #91905 (PROBLEM): License for export
Issue #94979 (PROBLEM): Crash when HelpWidget is closed before webview is done loading

Issue #77847 (ENHANCEMENT): Rework Layout topology search
Issue #79689 (ENHANCEMENT): Display VARGROUPS different
Issue #88615 (ENHANCEMENT): Search usage in help system could be improved
Issue #88921 (ENHANCEMENT): Design PLMsynchro wizards for most common pipelines
Issue #92819 (ENHANCEMENT): Design of PART2cad Information must be reworked (pnlp Rework)

Issue #85695 (ENHANCEMENT): Missing version for Autocad 2017 export in the offline CD
Issue #87923 (ENHANCEMENT): readme is missing from the Inventor Iface folder to explain how to use the new addin method
Issue #89409 (ENHANCEMENT): EULA - user does not need to read complete agreement
Issue #89415 (ENHANCEMENT): Registration Wizard - Logo does not have white background
Issue #89461 (ENHANCEMENT): Offline CD - duplicate shortcuts in PARTdataManager toolbar
Issue #89431 (PROBLEM): Registration Wizard - Empty notification dialog
Issue #89435 (PROBLEM): Offline CD - uninstallation not working from start menu
Issue #89447 (PROBLEM): English splashscreen is removed after you change other setting
Issue #89463 (PROBLEM): PARTinformation no preview in Offline CD v11sp2
Issue #89477 (PROBLEM): Can not read *.def files while creating offlineCD
Issue #89501 (PROBLEM): Offline Cd - catalog update not working
Issue #89519 (PROBLEM): Offline CD - japanese EULA present when not selected during offline CD creation
Issue #89565 (PROBLEM): Only one cip is saved on catalogs list
Issue #89575 (PROBLEM): Creo Parametric and Inventor export offline (Parametric) options are available by default
Issue #89577 (PROBLEM): Autodesk Revit (single part) offline export is not translated in English
Issue #89953 (PROBLEM): Error in PARTadmin when switching from HELP to CONTEXT HELP
Issue #91839 (PROBLEM): PARTdatamanager could not be started on created offlineCD

Issue #91051 (PROBLEM): Unable to define media variable for table in PARTtemplateDesigner

Issue #82803 (ENHANCEMENT): Color parts in assembly configurator
Issue #83329 (ENHANCEMENT): Linear/Rotation attributes order is not the same
Issue #88795 (ENHANCEMENT): Insert part in configurator - fully positionable enabled by default
Issue #89367 (ENHANCEMENT): 3D view tab not visible In configuration
Issue #94823 (ENHANCEMENT): Pinlookup script not working
Issue #74707 (PROBLEM): Number of decimal places in project - bug
Issue #83333 (PROBLEM): Wrong selection after adding new actuator
Issue #87133 (PROBLEM): Next Free connection point not selected after table change in assembly config
Issue #88355 (PROBLEM): project not loaded properly
Issue #88825 (PROBLEM): Value range assignments not working
Issue #91757 (PROBLEM): Selecting parts on 3D view should highlight them in tree
Issue #93741 (PROBLEM): Saving template will create bmp preview
Issue #94727 (PROBLEM): Value range option in configurator doesn't work

Issue #91003 (ENHANCEMENT): Remove PARTdxfConverter from installation / offlines etc.
Issue #91005 (PROBLEM): PARTdxfConverter removed

Issue #8597 (ENHANCEMENT): Export CSV for Translation - Add Selection of Items
Issue #29680 (ENHANCEMENT): Add part color to render material definition
Issue #35315 (ENHANCEMENT): Timeout settings for SVN
Issue #43763 (ENHANCEMENT): Add Media variable name to translation csv
Issue #53399 (ENHANCEMENT): Suggestions for newer versions of PARTeditor
Issue #55737 (ENHANCEMENT): PARTproject - Open files in Windows Explorer from imported catalogs
Issue #62661 (ENHANCEMENT): Port role selection dialog to Qt (because it does not appear in taskbar)
Issue #66573 (ENHANCEMENT): ERP-Mapping - Is it necessary to check all *.prj files while adding ERP mapping?
Issue #66869 (ENHANCEMENT): Catalog ERP Mapping - One click for remove and verify lines
Issue #66871 (ENHANCEMENT): Catalogue ERP Mapping - Multi lines selection
Issue #68711 (ENHANCEMENT): Delete (unused) files window doesn't extend correctly
Issue #69731 (ENHANCEMENT): Marking of edges should be more visible
Issue #71419 (ENHANCEMENT): Edit ERP-Mapping: Mark not existing projects
Issue #75773 (ENHANCEMENT): Let the user edit the attribute name in class system editor
Issue #76041 (ENHANCEMENT): Progress bar while Searching for published catalog versions
Issue #77523 (ENHANCEMENT): PARTproject: File operations dialogs
Issue #77605 (ENHANCEMENT): Check Previews per Line before publishing
Issue #78201 (ENHANCEMENT): Deeplinks generator - Save path, wrong command
Issue #79783 (ENHANCEMENT): Do not allow creating second link of same project in same directory
Issue #81805 (ENHANCEMENT): Classification GUI: Lock free value specification optionally
Issue #82339 (ENHANCEMENT): Info text output is not completely readable / cut
Issue #82603 (ENHANCEMENT): Set classification dialog resizeable but content not adaptable
Issue #82605 (ENHANCEMENT): Map classifications progress bar not accurate time wise
Issue #82607 (ENHANCEMENT): Map classifications started than closed, pproject crashes
Issue #82623 (ENHANCEMENT): Map classifications, translation error when not configured properly
Issue #82633 (ENHANCEMENT): Map classifications, translation error when adding project to class is done
Issue #82635 (ENHANCEMENT): Set classification: *.CSV selection always starts from cadenas "64" software folder
Issue #82641 (ENHANCEMENT): Map classifications, attribute can't be removed if class assignment is missing
Issue #82729 (ENHANCEMENT): Map classifications, mapping window forced in foreground
Issue #82735 (ENHANCEMENT): Add GUI options to control VIEWAXIS keys in PARTproject
Issue #82755 (ENHANCEMENT): Classifications, variable & value should not be added to attribute at the same time when using CSV
Issue #84889 (ENHANCEMENT): Class System Editor: Allow to order variables by the user
Issue #85351 (ENHANCEMENT): Enhance material library with viewing materials
Issue #85647 (ENHANCEMENT): Show warning if a mapping was created with a CIP file and the data is not available
Issue #86497 (ENHANCEMENT): Semi-manual process to map colors to materials
Issue #86665 (ENHANCEMENT): DXF and DWG import (to PRA) window naming is "DXF Import" in both cases
Issue #86881 (ENHANCEMENT): Change delete confirmation dialog title
Issue #86995 (ENHANCEMENT): Render materials dialog should display a warning when materials.xml is write protected
Issue #87429 (ENHANCEMENT): Add a filter to show unmapped target lines in ERP mapping editor
Issue #87549 (ENHANCEMENT): PARTproject publishing partial from dir.pmf files
Issue #87631 (ENHANCEMENT): Need "By_Country" address importer for eCAT V11
Issue #88739 (ENHANCEMENT): PARTproject - LINA is missing in Edit project window
Issue #88841 (ENHANCEMENT): Handle ERP mappings in catalog separation tool
Issue #88945 (ENHANCEMENT): ERP mappings refactoring: port attribute algorithm parser to new table
Issue #89127 (ENHANCEMENT): Publication context menu
Issue #89265 (ENHANCEMENT): Add copy&paste function for ERP mapping rules
Issue #89357 (ENHANCEMENT): 64bit PARTdatamanager should be started by default
Issue #89655 (ENHANCEMENT): Set default LODDEST in templates for new projects
Issue #89801 (ENHANCEMENT): Classification by CSV: Allow to classify lines
Issue #89811 (ENHANCEMENT): Simple adding of EOL for a selected table line
Issue #89919 (ENHANCEMENT): Optimize EOL icon handling in PARTproject
Issue #90163 (ENHANCEMENT): PARTproject/Table file; selected row is always positioned in the middle
Issue #90527 (ENHANCEMENT): PARTproject SVN Publishing verify catalog is on cadenas-admin listed
Issue #91085 (ENHANCEMENT): Translate "Connection Points rotieren" in English
Issue #91679 (ENHANCEMENT): Options for Coordinate axes are not translated in English
Issue #92511 (ENHANCEMENT): Allow LINA to be used in classifications
Issue #92777 (ENHANCEMENT): Extends MaterialColorScanner to include projects and convert assembly-colors to project-colors
Issue #93701 (ENHANCEMENT): Show different 3D models in texture editor
Issue #93731 (ENHANCEMENT): Mapping.json file could not be checked out in V11
Issue #94087 (ENHANCEMENT): PARTproject - Additional modules have no frame titles
Issue #94451 (ENHANCEMENT): Show description rather than id in material overview
Issue #46757 (PROBLEM): Forbid [] in variable description (only in GUI)
Issue #48471 (PROBLEM): TAG Cloud exclusion PARTproject Norm folder
Issue #52479 (PROBLEM): PARTproject - Project is replaced without note
Issue #54749 (PROBLEM): Rename project will overwrite already existing project with same name
Issue #67287 (PROBLEM): Text search button does not work if nothing is selected in "Project selection" tree
Issue #71743 (PROBLEM): When creating new project you should not be able to delete/edit template field
Issue #74261 (PROBLEM): "The wrong diskette is in the drive" error in PARTproject
Issue #76593 (PROBLEM): pproject: Calling 3db results in total crash
Issue #79019 (PROBLEM): Missing common variable for eclass variables in variable search
Issue #79393 (PROBLEM): PNG batch creation creates katalog.bmp
Issue #81833 (PROBLEM): PARTproject: Error in recalculation with CADENAS_LANGUAGE envvar
Issue #82571 (PROBLEM): Images for Table header, please translate image browse window
Issue #84267 (PROBLEM): Classifications in PSOL
Issue #84849 (PROBLEM): Backslashes in target path disappear after closing "Define replacement projects" window
Issue #84853 (PROBLEM): Add LOD variables dialog minor UI enhancement
Issue #85395 (PROBLEM): V11 Can not open tac and tab files from PARTproject
Issue #86003 (PROBLEM): PARTInfoTool not working properly
Issue #86013 (PROBLEM): Set classification batch doesn't work
Issue #87107 (PROBLEM): Execute ERP-Mapping for changed projects will crash PARTproject
Issue #87223 (PROBLEM): New project should not be shown in mapping dialog
Issue #87385 (PROBLEM): Opening PARTdesigner from testmeta results will not open any 3db and/or tab
Issue #88329 (PROBLEM): Empty Dialog in "add project to classification"
Issue #88649 (PROBLEM): CNSE17:attributelength in PARTproject batch only allows 14 instead of 15 characters
Issue #88837 (PROBLEM): Testmeta reports an error: "The part has no geometry" on dummy project
Issue #88853 (PROBLEM): ERP Mapping: Update mapping state when assigning new target
Issue #88861 (PROBLEM): ERP Mapping: value range mapping dialog uses wrong line
Issue #88889 (PROBLEM): Not mapped projects have table shown as mapped
Issue #88895 (PROBLEM): Map resolved value ranges does not give all combination
Issue #88941 (PROBLEM): Variable assignment formulas with conditions don´t work in ERP mappings
Issue #89113 (PROBLEM): Load varset that produced a mapping error does not work in 11 SP2
Issue #89117 (PROBLEM): Approve icon should be changed when you want to approve some other row
Issue #89125 (PROBLEM): Project which is automatically mapped is not updated correctly
Issue #90921 (PROBLEM): Media variable values are not correctly shown in PRINTcatalog Tab
Issue #91871 (PROBLEM): Standard name (NB) not updated when you change value in value range
Issue #92159 (PROBLEM): Duplicate lines exported in Deeplinks generator
Issue #92403 (PROBLEM): When updating the index, PARTproject complains that a path is not a working copy
Issue #92449 (PROBLEM): Allow to edit type code in PARTproject
Issue #92851 (PROBLEM): Rename of project in PARTproject throws error and minidump
Issue #93243 (PROBLEM): Editing of materials out of a project should also work
Issue #93247 (PROBLEM): Opening a configuration out of PProject in PDataMgr leads to an endless loop
Issue #93393 (PROBLEM): PARTproject wants to save changes in Class 2.0 projects even if nothing changed
Issue #93711 (PROBLEM): Batch process changes data type to text
Issue #93909 (PROBLEM): Write license to 3db files when separating catalogs
Issue #94081 (PROBLEM): PARTproject - collect classification data... window
Issue #94083 (PROBLEM): PARTproject - collect classification data - save type
Issue #94151 (PROBLEM): ERP Mapping - Table scroll when changing value range values
Issue #94155 (PROBLEM): ERP Mapping - approval of value range split into 2 project
Issue #94191 (PROBLEM): PARTproject crashes while creating new project
Issue #94225 (PROBLEM): PARTdataManager: "Edit with PARTproject" option generates PARTproject crash
Issue #94229 (PROBLEM): Delete single Files in Folder. Option DEL is grey
Issue #94307 (PROBLEM): ERP mapping - not working with order number
Issue #94333 (PROBLEM): Improve search of publications in add ERP mapping dialog
Issue #94419 (PROBLEM): Change the layout of the Render materials Dialog
Issue #94479 (PROBLEM): Increase maximum scale for textures in material dialog
Issue #94529 (PROBLEM): Merge list settings in catalog separation tool
Issue #94531 (PROBLEM): Test meta doesn't detect that classified variable doesn't exist in table
Issue #94551 (PROBLEM): Class assign dialog: Allow to search in hidden classifications
Issue #94887 (PROBLEM): Can not rename file with an invalid filename to a valid file name
Issue #94997 (PROBLEM): Wrong error message: "Ungültiger Benutername oder Passwort!"
Issue #95179 (PROBLEM): Manually remapping a line does not work in v11sp3
Issue #95337 (PROBLEM): Can not assign value to classification variable in PARTproject

Issue #85703 (ENHANCEMENT): Q&S Importer: Accept MetaMesh as Input instead of ZJV from Revit
Issue #86967 (ENHANCEMENT): Enhance Q&S with additional column types in the CSV to define Document Columns and Additional Files
Issue #86907 (PROBLEM): Quick & Simple Importer: preview not created for projects and folders
Issue #87509 (PROBLEM): 3D viewer don't show color of quick & simple model
Issue #88589 (PROBLEM): Quick&Simple Importer does not import all columns (Japanese variable headers)

Issue #48711 (ENHANCEMENT): Testmeta should check constraint settings Translation/Rotation for logic
Issue #87061 (ENHANCEMENT): Check custom dimension variable mapping in test meta
Issue #87723 (ENHANCEMENT): Testmeta can't report same connection point created multiple times
Issue #54713 (PROBLEM): In two projects same NB, TestMeta pass without error
Issue #86255 (PROBLEM): Wrong unit in "Topology information" docking for Q&S INCH part
Issue #87949 (PROBLEM): Testmeta reports an error that doesn't exist
Issue #90839 (PROBLEM): Test-meta should detect duplicate values of CNSORDERNO classified variables
Issue #92205 (PROBLEM): Test meta; typo mistake: Warnign instead of Warning
Issue #93625 (PROBLEM): Testmeta reports errors in many languages

Issue #52671 (ENHANCEMENT): New option for "Rotate copy" tool if we do that on Connection points
Issue #59425 (ENHANCEMENT): PARTdesigner - add scale option for whole 3db
Issue #60021 (ENHANCEMENT): Combine PDesigner and PEditor
Issue #66349 (ENHANCEMENT): Sort variables in variable manager and width of column
Issue #71533 (ENHANCEMENT): Selecting lines and curves in PARTdesigner - Improve handling
Issue #71587 (ENHANCEMENT): When deleting sketch "Remove all" button should be smaller
Issue #75643 (ENHANCEMENT): Make save button interactive in PARTeditor
Issue #76501 (ENHANCEMENT): pdesigner: Item selected in Sketch History should trigger a highlighted element in Sketcher
Issue #77691 (ENHANCEMENT): pdesigner: add functionality for "Standard variables" in the Variable manager
Issue #77799 (ENHANCEMENT): pdesigner: Missing icon for "Integer" - "F" for floating is displayed
Issue #78105 (ENHANCEMENT): pdesigner: Show message if 3d and table are not corresponding
Issue #78815 (ENHANCEMENT): Missing functions from PARTeditor in PARTdesigner V11
Issue #79105 (ENHANCEMENT): Do not ask for Part Information if it is already inputted
Issue #80299 (ENHANCEMENT): Keep current line highlighted
Issue #80383 (ENHANCEMENT): Combine 3DB & TAB info dialogs into one for PARTdesigner
Issue #83723 (ENHANCEMENT): Variable Manager in PARTdesigner, please translate "Speicherort:" and it's values
Issue #83735 (ENHANCEMENT): PARTdesigner, please translate some of the options
Issue #83753 (ENHANCEMENT): PARTdesigner, multiply adding or deleting rows should be possible
Issue #83801 (ENHANCEMENT): PSOL version is not shown in new PARTdesigner title
Issue #83881 (ENHANCEMENT): Resolve Value range doesn't exist in v11
Issue #83919 (ENHANCEMENT): "IF" on feature icon could be more visible (bigger)
Issue #84177 (ENHANCEMENT): Color added in PARTproject is not displayed on 3D model in PARTdesigner
Issue #84317 (ENHANCEMENT): Creating conical threads, improve steps guide
Issue #84509 (ENHANCEMENT): Show new help tooltips in PARTdesigner for value ranges and algorithms
Issue #85079 (ENHANCEMENT): Part Information and Scale Part: API to update variables not available in Variable Editor
Issue #85667 (ENHANCEMENT): Show correct VIEWAXISUP in new PARTdesigner 3D view
Issue #86981 (ENHANCEMENT): Please add "F10" information to Settings
Issue #87271 (ENHANCEMENT): PDesigner Save Dialog UI
Issue #87285 (ENHANCEMENT): 3db name not shown in PARTdesigner
Issue #88997 (ENHANCEMENT): PARTdesigner depiction of Extrusion before value input not optimal
Issue #89001 (ENHANCEMENT): Partdesigner "Standard view restore" is not translated
Issue #89673 (ENHANCEMENT): Open designer from project should put designer to front
Issue #91207 (ENHANCEMENT): PARTdesigner should open project directly when there is only one 3D geometry
Issue #91305 (ENHANCEMENT): PARTdesigner crashes when trying to duplicate a sketch on a circle face
Issue #92311 (ENHANCEMENT): Remove "Create polyline" from sketcher toolbar
Issue #92417 (ENHANCEMENT): Remove toolbar button for automatic recalculation function
Issue #92447 (ENHANCEMENT): Add progress for calculation
Issue #92495 (ENHANCEMENT): Open PS3
Issue #93099 (ENHANCEMENT): Debugger variable list usability
Issue #93131 (ENHANCEMENT): Variable dependencies graph not available
Issue #93299 (ENHANCEMENT): "Save as..." is not requesting ID data
Issue #93491 (ENHANCEMENT): Check standard description text is not translated in English
Issue #93493 (ENHANCEMENT): Maybe we should use unique name for Part information - ID data
Issue #93495 (ENHANCEMENT): Tooltip for Save as CSV file button is not translated in English
Issue #93497 (ENHANCEMENT): Option for saving table as CSV file is not translated in English
Issue #93499 (ENHANCEMENT): Column "Komponente" in Messages is not translated in English
Issue #93505 (ENHANCEMENT): Dialog for unsaved changes in Variable manager is not translated in English
Issue #93547 (ENHANCEMENT): Move "show variable dependencies" button
Issue #93561 (ENHANCEMENT): Remove variable linkage in text face attribute (Label / Hotspot)
Issue #93783 (ENHANCEMENT): Value for Integer number with 8 digits shown as number with exponent
Issue #93887 (ENHANCEMENT): Handle different formula notations
Issue #93913 (ENHANCEMENT): Make Fillet default choice for creating Blend feature
Issue #93925 (ENHANCEMENT): Clear selection if you close Measure dialog
Issue #93933 (ENHANCEMENT): Update 3D view while you move mark line
Issue #94135 (ENHANCEMENT): Table line selection via Ctrl/Shift keys
Issue #94139 (ENHANCEMENT): Geometry data - Description of geometry dialog
Issue #94353 (ENHANCEMENT): Allow to handle illegal variable names to some extent
Issue #94447 (ENHANCEMENT): STRG+S for saving
Issue #94579 (ENHANCEMENT): Check variable selection handling
Issue #35807 (PROBLEM): Real number 5.0 shouldn't exist
Issue #66505 (PROBLEM): Crash in PARTdesigner
Issue #71461 (PROBLEM): "Dimensioning point" checkbox issue - PARTdesigner
Issue #73245 (PROBLEM): Crash in designer when trying to create sketch on selected face
Issue #73457 (PROBLEM): Crash in designer when editing reference plane
Issue #73851 (PROBLEM): Partdesigner doesn't work correctly
Issue #73863 (PROBLEM): Designer hangs up when creating sweep on anti-parallel planes
Issue #73889 (PROBLEM): Crash in designer when duplicating sketch
Issue #74099 (PROBLEM): Remove neutral import from PARTdesigner (just hide menu, let the code persist if we need it later)
Issue #76349 (PROBLEM): Current View won´t work with 2d derivation
Issue #76507 (PROBLEM): pdesinger: When closing pdesigner sometimes changes get lost
Issue #76529 (PROBLEM): pdesigner: Shape outline of sketch not displayed in 3D
Issue #76683 (PROBLEM): pdesigner: Click on a table button causes error
Issue #77341 (PROBLEM): pdesigner: Provide function to restore standard view
Issue #77651 (PROBLEM): pdesigner: Total crash of computer with black screen
Issue #77713 (PROBLEM): pdesigner: Adjustment of view not according to file type
Issue #77741 (PROBLEM): pdesigner: Dialog box "ID data" is not opened
Issue #77783 (PROBLEM): Edges are not visible after running solidchecker (Test part) on part with error
Issue #78919 (PROBLEM): PARTproject - when table doc is opened in PARTdesigner, another one can't be opened
Issue #78935 (PROBLEM): Type-Identification not correct in variable manager
Issue #79395 (PROBLEM): PARTdesigner crash when you try to replace sketch with connection point
Issue #80873 (PROBLEM): Invalid algorithm is not reported in PARTdesigner
Issue #82663 (PROBLEM): Pan in any direction facing the sketch plane does not work
Issue #82751 (PROBLEM): Forbid adding attributes to sweep surfaces
Issue #83727 (PROBLEM): Variable manager, when you select variable , section for Data type should also load correct value
Issue #83733 (PROBLEM): Variable Manager, minidump when you try to Rename variable
Issue #83747 (PROBLEM): PARTeditor / PARTproject, error window can not be closed if you before don't fix the problem
Issue #83751 (PROBLEM): PARTdesigner, add numeration to rows
Issue #83771 (PROBLEM): PARTdesigner, marked sketch in 3D History should be visible in 3D view
Issue #83783 (PROBLEM): PARTdesigner, if you close window with Sketcher or Table you should be offered to Save project
Issue #83787 (PROBLEM): Update sketch in 3D view while it is edited in sketch view
Issue #83797 (PROBLEM): Rotation axis not visible in 3D view
Issue #83821 (PROBLEM): 3D History, "Visible" function doesn't working
Issue #83827 (PROBLEM): 3D History, "Set mark" function doesn't working
Issue #83831 (PROBLEM): Sketch and features are not grayed out under Moveable time line
Issue #83851 (PROBLEM): Importing dxf files in sketcher does not work
Issue #83855 (PROBLEM): Solid Checker doesn't work
Issue #83859 (PROBLEM): LOD , Show connection points and Export in file options missing
Issue #83863 (PROBLEM): When you start section cut in 3D view right click options doesn't exist anymore
Issue #83879 (PROBLEM): Add save and import table as CSV options
Issue #83887 (PROBLEM): PARTdesigner, Search window should be opened with F3
Issue #83907 (PROBLEM): Face Attribute Text is not visible in PARTdesigner
Issue #83915 (PROBLEM): 3D History, highlight last sketch that you worked on it
Issue #83955 (PROBLEM): PARTdesigner, Red/cyan effect doesn't work
Issue #83965 (PROBLEM): Sketcher; "Apply Line Style" and "Apply Line Width", no options to choose
Issue #84045 (PROBLEM): Improve "Select all surfaces" in v11
Issue #84059 (PROBLEM): Problem with mouse wheel zoom in Sketcher and 3D view
Issue #84081 (PROBLEM): Not usable dockings when opened PARTdesigner from PARTproject with double click on table file
Issue #84097 (PROBLEM): After you open sketch, 3D view should make automatic readjustment in view to fit sketcher
Issue #84167 (PROBLEM): "," in data input should bring syntax error
Issue #84223 (PROBLEM): Reference point for rotated pattern and Pattern origin points in same sketch
Issue #84273 (PROBLEM): Mark step in Sketch history, where error occur, with red
Issue #84277 (PROBLEM): No need for reopening error message window after every move history line in Sketch history
Issue #84307 (PROBLEM): Problem with creating conical threads
Issue #84331 (PROBLEM): Dragging progress line in Sketch history does not follow sketcher progress
Issue #84337 (PROBLEM): Status information related with progress line in Sketch history missing
Issue #84341 (PROBLEM): Highlighting in sketcher works only for top level history elements
Issue #84359 (PROBLEM): Make inactive "Save" button when you open "read-only" project
Issue #84379 (PROBLEM): "Arrows" in PARTdesigner doesn't work
Issue #86009 (PROBLEM): 2d derivation in PARTdesigner is disabled
Issue #86049 (PROBLEM): Face for blend can be added multiple times
Issue #86697 (PROBLEM): Update problem in Sketcher display
Issue #86831 (PROBLEM): No confirmation dialog when deleting sketch
Issue #86979 (PROBLEM): Physical properties of the part missing
Issue #87017 (PROBLEM): Table have wrong row highlighted, different one is selected
Issue #87019 (PROBLEM): Measure dialog goes behind Designer, should stay on top
Issue #87111 (PROBLEM): Incorrect configuration loaded in PARTdesigner
Issue #87247 (PROBLEM): Blend feature does not work correctly with conditions
Issue #87251 (PROBLEM): Blend feature not treated as change in model
Issue #87255 (PROBLEM): Change in table not treated as change
Issue #87279 (PROBLEM): Pdesign keep old file NEW the current file name. The next save won´t ask and overwrite
Issue #87307 (PROBLEM): Blend could not be added on edge created with cut extrude
Issue #87463 (PROBLEM): pdesigner: Crash when opening Identification type dialog and closing (without changes)
Issue #87503 (PROBLEM): PARTdesigner could not open 2db files
Issue #87669 (PROBLEM): Blend after fixing invalid combination
Issue #87909 (PROBLEM): Blend Operation on Patterns are wrong implemented
Issue #88041 (PROBLEM): Drag&Drop broken in PARTdesigner
Issue #88261 (PROBLEM): Rezoom after every feature edit or change
Issue #88697 (PROBLEM): PARTdesigner and Variable Manager of PARTeditor has different Identification types of variables in same project
Issue #88771 (PROBLEM): Blend Feature fails when two edges in different angle are selected
Issue #88961 (PROBLEM): PARTdesigner - task bar behind model
Issue #88981 (PROBLEM): PARTproject does not send 3db to opened PARTdesigner
Issue #88983 (PROBLEM): Global rotation in PARTdesigner does not work correct for connection points
Issue #89095 (PROBLEM): PARTdesigner Crash when opening large parts or geometries
Issue #89675 (PROBLEM): Changing values in table / variable manager does not change it in 3D
Issue #89677 (PROBLEM): "Cancel" is not canceling when opening a part in designer and an unsaved part is still open
Issue #89707 (PROBLEM): Creating a new project leads to table errors
Issue #90565 (PROBLEM): Variable Manager; resizable columns
Issue #91581 (PROBLEM): PARTdesigner - save button is not active
Issue #91603 (PROBLEM): Properties on default planes does not work
Issue #91657 (PROBLEM): Table file could be saved without valid NB
Issue #91677 (PROBLEM): Algorithm check reports error if variable is not committed
Issue #91697 (PROBLEM): Two connection points with same name
Issue #91707 (PROBLEM): "Check standard description" does not work
Issue #91729 (PROBLEM): Requesting geometry ID data even you are only editing table
Issue #91859 (PROBLEM): "Check part"-errors not visible in 3D view
Issue #91887 (PROBLEM): PARTdesigner hovering not working correctly
Issue #92027 (PROBLEM): Forbid in variable description (only in GUI)
Issue #92163 (PROBLEM): PARTdesigner consumes 100% CPU in some cases
Issue #92243 (PROBLEM): Moving of history marker leads to multiple selected tree elements
Issue #92323 (PROBLEM): Moving history marker in sketcher can lead to crash in some cases
Issue #92325 (PROBLEM): Load/save behaviour
Issue #92329 (PROBLEM): Highlighting in 3D view does not react to table changes
Issue #92343 (PROBLEM): Zoomed sketch is only partially visible in 3D view
Issue #92345 (PROBLEM): Better handling of 2D projects
Issue #92353 (PROBLEM): Possible crash when switching table lines
Issue #92381 (PROBLEM): Crash when deleting dimensions
Issue #92387 (PROBLEM): Infinite loop when creating a 2D drawing based on a sketch
Issue #92391 (PROBLEM): Set overlay does not work
Issue #92397 (PROBLEM): Creating a drawing from sketch sets new variable names
Issue #92411 (PROBLEM): Possible crash when a history feature is selected and a new file is opened
Issue #92425 (PROBLEM): Selection marker not drawn correctly
Issue #92441 (PROBLEM): Too many errors appear in the log window
Issue #92459 (PROBLEM): Possible crash when terminating PARTdesigner
Issue #92499 (PROBLEM): Parameter dialog of base point is empty
Issue #92505 (PROBLEM): No properties dialog should be available for destination point
Issue #92507 (PROBLEM): Insert hexagon sometimes crashes after showing rotation angle dialog
Issue #92525 (PROBLEM): Deactivate current tool when sketcher is closed
Issue #92533 (PROBLEM): Designer 3d view face hovering does not work with cut planes
Issue #92703 (PROBLEM): Sketcher history not updated after changing parameters
Issue #92707 (PROBLEM): Moving sketch history marker is slow for large histories
Issue #92709 (PROBLEM): Connection point names are truncated
Issue #92723 (PROBLEM): Error notification in parts with duplicated connection points
Issue #92813 (PROBLEM): Selection window for 3db variants between core diameter and nominal diameter is missing
Issue #92879 (PROBLEM): Blend feature - revise editing of blends
Issue #92909 (PROBLEM): Error appears when opening some assemblies
Issue #92927 (PROBLEM): Disable Face attributes for Blends and Sweeps
Issue #92929 (PROBLEM): Unable to load 3DB from subfolder in some cases
Issue #92985 (PROBLEM): Possible crash when accepting sketch and history marker was moved
Issue #92995 (PROBLEM): Sketcher doesn't ask if changes should be saved if you hit X
Issue #93019 (PROBLEM): Crash: load File while sketcher is open
Issue #93101 (PROBLEM): Double click on variable does not scroll to variable in the debugger view
Issue #93103 (PROBLEM): Table debugger does not resolve algorithms
Issue #93105 (PROBLEM): Table debugger does not react to table changes
Issue #93137 (PROBLEM): Make Variable Manager more user friendly
Issue #93177 (PROBLEM): Crash after opening two 2DBs in succession
Issue #93227 (PROBLEM): Variable manager not updated correctly when you change the table line
Issue #93237 (PROBLEM): Ask to save before creating new table
Issue #93291 (PROBLEM): Wrong line selected after adding new line in table
Issue #93301 (PROBLEM): ID dialog won't open via menu/toolbar when no table is loaded
Issue #93303 (PROBLEM): ID dialog requests to fill mandatory fields although no table was loaded
Issue #93323 (PROBLEM): Syntax error in variable manager
Issue #93359 (PROBLEM): Notification QA mode is active comes up if I try to open 3db file from data directory over double click
Issue #93389 (PROBLEM): Synchronisation between table and variable in part doesn't work correctly
Issue #93399 (PROBLEM): Function templates are missing in context menu when editing an algorithm
Issue #93533 (PROBLEM): Test mode/Debug table behavior
Issue #93535 (PROBLEM): Highlighting of variables/values in Debugger
Issue #93549 (PROBLEM): PARTdesigner does not detect if tab file is read only
Issue #93551 (PROBLEM): Empty entries in table gets strange values
Issue #93557 (PROBLEM): Debugger should be always on top
Issue #93565 (PROBLEM): Debugger is not closed when you close PARTdesigner
Issue #93613 (PROBLEM): ID data change not recognized as change in table
Issue #93663 (PROBLEM): Measure dialog not closed when you close PARTdesigner
Issue #93675 (PROBLEM): Files are saved even when the ID dialog was rejected
Issue #93677 (PROBLEM): Save button becomes disabled when no files have been saved
Issue #93691 (PROBLEM): Selected plane/s should be darker
Issue #93707 (PROBLEM): Integer and Text Digits
Issue #93779 (PROBLEM): Sketcher - "Scale Elements" icon is missing
Issue #93781 (PROBLEM): Sketcher - "Rotation axis" can be set for all shapes
Issue #93789 (PROBLEM): Sketcher - Differences of available functions in drawing mode
Issue #93805 (PROBLEM): Sketcher - Annotation Element shows "unknown Message" in status bar
Issue #93825 (PROBLEM): Using main save function while sketcher is opened will overwrite your 3DB with the 2D data
Issue #93849 (PROBLEM): Crash when geometry file could not be loaded
Issue #93867 (PROBLEM): Only one of multiple selected planes is visible in 3D after moving the mouse
Issue #93877 (PROBLEM): Different display of decimal mark
Issue #93889 (PROBLEM): Missing extended context menu in variable manager
Issue #93891 (PROBLEM): Unable to set text value when creating a new variable
Issue #93967 (PROBLEM): Enhance table behaviour in PARTdesigner
Issue #93973 (PROBLEM): Add buttons to switch on/off column types in PARTdesigner
Issue #94001 (PROBLEM): Save/Load table files that contain warnings
Issue #94017 (PROBLEM): Changed flag not set when deleting variable
Issue #94029 (PROBLEM): Crash when using "Check Part" and only a table was opened
Issue #94051 (PROBLEM): Prohibit deleting used variables
Issue #94069 (PROBLEM): PARTdesigner - stuck after using Blend feature on complicated project
Issue #94099 (PROBLEM): 3D Preview of a rotation axis is always displayed in XY-Plane
Issue #94181 (PROBLEM): Blend feature - Chamfer/Fillet dialog performance problems
Issue #94185 (PROBLEM): Blend feature - Chamfer/Fillet dialog wrong at first start
Issue #94209 (PROBLEM): Sketcher - Preview of angle dimensions is not drawn correctly
Issue #94255 (PROBLEM): Wrong color descriptions in settings dialog
Issue #94303 (PROBLEM): Input condition without activating it
Issue #94317 (PROBLEM): Dialog to apply variable changes is shown after project was closed
Issue #94347 (PROBLEM): Some warnings are not shown when a tab file is read
Issue #94387 (PROBLEM): Hover effect in variable manager causes lag
Issue #94443 (PROBLEM): Switching variables does not change all fields of variable attributes
Issue #94457 (PROBLEM): Disable 3D history docking when the sketcher is opened
Issue #94495 (PROBLEM): Hovered element should be reset in 3D when the hovered element is cleared the history tree
Issue #94505 (PROBLEM): Deleting multiple variables at once does not always remove the whole selection
Issue #94517 (PROBLEM): Improve selection after multiple variables have been deleted
Issue #94557 (PROBLEM): Designer crash an preview of invalid plane
Issue #94565 (PROBLEM): Rotation around axis crashes when sketch is created on reference plane
Issue #94575 (PROBLEM): Show message to user if switching between variables without committing the changes
Issue #94583 (PROBLEM): Save button stays disabled after changing ID data
Issue #94629 (PROBLEM): "Syntax error" when use "Value range variable with naming"
Issue #94665 (PROBLEM): Blend performance/memory problems
Issue #94681 (PROBLEM): Choosing a variable with right click doesn't set correct syntax
Issue #94703 (PROBLEM): Debugger does not load some variable values
Issue #94707 (PROBLEM): Disable variable sorting in PARTdesigner
Issue #94741 (PROBLEM): User is not informed when new 3db file is loaded
Issue #94763 (PROBLEM): On open do not select any row in table
Issue #94785 (PROBLEM): Configurable Colors in PDesigner
Issue #94791 (PROBLEM): Context menu entries are missing for NB and LINA
Issue #94867 (PROBLEM): Sketch could not be marked as construction
Issue #94875 (PROBLEM): Points could not be selected on some sketches
Issue #94877 (PROBLEM): New allocation of reference point does not work
Issue #94881 (PROBLEM): Toggle-option for previews in dialogs
Issue #94883 (PROBLEM): Blend feature - suppressed condition influences Blend feature
Issue #94907 (PROBLEM): Dimensioning points are not visible in 3D view
Issue #94925 (PROBLEM): when you press dot/comma on NumPad, you receive some unwanted behavior
Issue #95085 (PROBLEM): Sketcher - Descriptions in parameter dialogs are not always translated

Issue #4465 (ENHANCEMENT): add example for pictures in value ranges to FW help
Issue #60015 (ENHANCEMENT): Simplified editing in Variable Manager
Issue #63171 (ENHANCEMENT): PARTeditor ID window resize
Issue #63375 (ENHANCEMENT): When you create a new variable in part editor it is by default in mm even if you chose text
Issue #64907 (ENHANCEMENT): PARTproject - table rows can only be deleted one by one
Issue #68417 (ENHANCEMENT): Make the value range display window bigger or resizeable
Issue #75645 (ENHANCEMENT): Resolving value ranges not recognized as change in table
Issue #79687 (ENHANCEMENT): Resolve value range doesn't work in some cases
Issue #87267 (ENHANCEMENT): Improvement of Blend Feature GUI
Issue #94093 (ENHANCEMENT): PARTdesigner / Editor V11- missing feature "Fill columns"
Issue #84541 (PROBLEM): ELSEIF Button does not work
Issue #94425 (PROBLEM): Check number of digits in display of 1e30 in a value range
Issue #94675 (PROBLEM): Mathematical function in table doesn't work
Issue #94677 (PROBLEM): Deleting of a variable that defines Value Range causes crash

Issue #45459 (PROBLEM): Improve classimporter performance
Issue #86633 (PROBLEM): PARTdataManager: missing right click classimport context menu
Issue #89161 (PROBLEM): "Edit dataset" error

Issue #81095 (ENHANCEMENT): Folder selection on native checkin does not work when "preferred rows" was used
Issue #87049 (ENHANCEMENT): Show topology info always on/off decision
Issue #89139 (ENHANCEMENT): Timestampnr is OFF by default when installing PSOL on MSSQL machine
Issue #89995 (ENHANCEMENT): Reevaluate SPECIAL_CATEGORY when LinkDb group is changed
Issue #90433 (ENHANCEMENT): erp_sorttable.vbb - descending sort
Issue #88533 (PROBLEM): Filtering table by search
Issue #88611 (PROBLEM): Help window: Index don't open with double click
Issue #89343 (PROBLEM): Tab restriction not working
Issue #89497 (PROBLEM): Search should not find lines which do not match table restrictions of the current role
Issue #92279 (PROBLEM): PLMTableDocView - symbol not displayed for native parts
Issue #93225 (PROBLEM): After changing ACTIVE-STATE in vertical table all values are empty
Issue #93267 (PROBLEM): Filter assistant UI does not merge ranges
Issue #93775 (PROBLEM): Error loading Assemblies when the parts contain erp numbers
Issue #94115 (PROBLEM): Tooltip for connected services does not work anymore
Issue #94757 (PROBLEM): Quick Toolbar for ERP - show_dbdata button grey when project is opened

Issue #55535 (ENHANCEMENT): Update Manager - value range fields
Issue #87727 (ENHANCEMENT): PARTlinkManager icon is blue only when it is running
Issue #91187 (ENHANCEMENT): Update Manager cannot be started
Issue #91919 (ENHANCEMENT): Update manager - Close dialog when you change target project
Issue #91975 (PROBLEM): Update manager - Error when changing target project
Issue #92001 (PROBLEM): Update manager - Target projects could not be changed for already mapped projects

Issue #72761 (ENHANCEMENT): Long key values are not completely visible in GUI
Issue #73347 (ENHANCEMENT): Long text is not completely visible in drop-down menu
Issue #84843 (ENHANCEMENT): Scroll to selected item in config tree after opening PARTadmin from CAD
Issue #86861 (ENHANCEMENT): "last changes" could be improved
Issue #88119 (ENHANCEMENT): Add scripting function to select config block in config editor
Issue #88567 (ENHANCEMENT): Better display of delete button in config editor's recent change list
Issue #88713 (ENHANCEMENT): Open SiteSetup with Windows Explorer doesn't work
Issue #88801 (ENHANCEMENT): Partial search; PARTadmin needs to be restarted after change is made in Configuration files
Issue #88959 (ENHANCEMENT): Configuration files- resize "Documentation" and "Short description" boxes
Issue #91953 (ENHANCEMENT): Confusing export buttons when updating catalogs
Issue #94459 (ENHANCEMENT): PSOL v11sp3 – PARTadmin - Translations
Issue #85923 (PROBLEM): Add missing fingerprints always include all algorithms
Issue #87399 (PROBLEM): Config editor does not show changed SITESETUP keys when the item name contains a period
Issue #87927 (PROBLEM): Config change history lost after a key or block is renamed
Issue #87943 (PROBLEM): Further inquiry by mail - "cfg" shown as block for all keys
Issue #88061 (PROBLEM): "Last changes" table is not updated correctly when config value is changed
Issue #88063 (PROBLEM): Stylesheet errors in config editor
Issue #88595 (PROBLEM): Option to restore default value of config key missing in context menu
Issue #89019 (PROBLEM): CadRegMgr: configured NX plugin path is incomplete
Issue #89123 (PROBLEM): Changing keys to inactive aren't visible in changed keys filter
Issue #89391 (PROBLEM): Incorrect behavior of INACTIVE config keys

Issue #53903 (ENHANCEMENT): Change message in log file - from "conversion failed" to "timeout"

Issue #38575 (ENHANCEMENT): Add new option to change catalog order
Issue #86855 (ENHANCEMENT): Catalog have "Full-text search index available"status and subfolder have missing index status
Issue #90953 (ENHANCEMENT): HTMBATCH - INDEX controls update error eclass 5.1
Issue #83729 (PROBLEM): Native pool remains after catalog is uninstalled
Issue #93799 (PROBLEM): PLMsynchro - Update view index restores appearance for hidden plmsynchro catalogs

Issue #34399 (PROBLEM): Viewing release notes of a broken CIP causes PARTadmin to hang up
Issue #87653 (PROBLEM): catalog updates too time consuming
Issue #89245 (PROBLEM): In updatewrongversions final message is not translated
Issue #89489 (PROBLEM): Assignment of numeric value to range variable during catalog update not possible
Issue #91477 (PROBLEM): Exporting CIP file analysis does not remember last save location
Issue #91519 (PROBLEM): QA-check of complete catalog - ERP status tab icons
Issue #91531 (PROBLEM): QA-check of complete catalog - ERP status tab similarity filtering does not work
Issue #91661 (PROBLEM): Silent installation with -auto does not always work
Issue #91665 (PROBLEM): Endless loop when catalog is already installed
Issue #91851 (PROBLEM): Catalog update - XVARSET of variants with value range in PLMTABLE2 is wrong after catalog update
Issue #91979 (PROBLEM): Check Catalog during cip installation update
Issue #94413 (PROBLEM): Cannot insert duplicate key in object dbo.PLMTABLE2

Issue #73795 (ENHANCEMENT): partupdate.cfg should be improved for better usability in PARTconfig Editor V2
Issue #84969 (ENHANCEMENT): Add Preferred catalog icon to Online update in PARTadmin
Issue #86299 (ENHANCEMENT): Use QImage instead of QPixmap in catalog icon loader thread
Issue #91471 (ENHANCEMENT): Customizing of RegistryKey for PARTupdate is not working
Issue #91785 (ENHANCEMENT): Wrong sorting by CIP size
Issue #63043 (PROBLEM): PARTupdate password is not encrypted in the log files
Issue #84557 (PROBLEM): COBie, CIBSE PDT problem
Issue #89375 (PROBLEM): Description missing for confidential icon
Issue #89539 (PROBLEM): PARTupdate - DownloadOnly flag will be changed by system
Issue #90605 (PROBLEM): PARTupdate Version hard coded 9.00 in catalog update auth or download request
Issue #91145 (PROBLEM): Memleak when changing catalog grouping
Issue #93665 (PROBLEM): Missing search indexes
Issue #93897 (PROBLEM): cip can't be installed after download
Issue #94777 (PROBLEM): Can not click install in pupdate.exe

Issue #85951 (ENHANCEMENT): AppServer Caching
Issue #89785 (ENHANCEMENT): Add EOL per line information to table service
Issue #93437 (ENHANCEMENT): remoteFileSystem=YES and plmsynchro catalog
Issue #93477 (ENHANCEMENT): Dashboard: Implement old appserver functions in new UI
Issue #89421 (PROBLEM): PAPPserver invalid timer
Issue #89843 (PROBLEM): mobile App license
Issue #94429 (PROBLEM): Correctness of created SSL certificate and automatic installation on client
Issue #94553 (PROBLEM): allow to mount pool and shared data from appserver in readonly mode

Issue #33215 (ENHANCEMENT): Discuss warning system at export (Was: Show warning if Thread definition is not valid for CAD export or during CAD export)
Issue #38895 (ENHANCEMENT): Drag files from file system into part compare
Issue #41981 (ENHANCEMENT): Search result list: Interesting information should not be hidden
Issue #50009 (ENHANCEMENT): Add 3D tooltips to Cloud Navigator
Issue #57189 (ENHANCEMENT): Translation "Messraster" is missing
Issue #66381 (ENHANCEMENT): Glasses should be highlighted on mouse hover
Issue #74531 (ENHANCEMENT): Compare Auto Align use manually rotated/translated position as start point for align or allow axis change on import
Issue #74787 (ENHANCEMENT): Delay closing folder and project tool-tips
Issue #75057 (ENHANCEMENT): If you open topology any search result it would be nice if values are highlighted in topology information
Issue #75661 (ENHANCEMENT): configuration mode turned off and you can still add and configure parts for assembly
Issue #76157 (ENHANCEMENT): PARTdataManager - restored down window
Issue #79377 (ENHANCEMENT): Show measuring grid, position of height dimension should be repositioned
Issue #81139 (ENHANCEMENT): No tooltip display of dimension point
Issue #81227 (ENHANCEMENT): Links in project to parts (row/value range) or whole directories (projects)
Issue #82825 (ENHANCEMENT): Enhance "Create duplicate analysis" with "Ignore hidden variable"
Issue #82891 (ENHANCEMENT): "Export to CAD" button should only work if parts view is active
Issue #83001 (ENHANCEMENT): Line in 3D view is moving while rotating
Issue #83427 (ENHANCEMENT): Possible to let the search result numbering start behind the search part?
Issue #83435 (ENHANCEMENT): Add help tooltip to search function in PARTdataManager
Issue #84855 (ENHANCEMENT): WYSIWYG Editor for menuvisibiliy_....cfg
Issue #85485 (ENHANCEMENT): Sort subsidiaries by SORTPOS
Issue #85763 (ENHANCEMENT): Dimensioning dialog: special characters are not masked
Issue #86171 (ENHANCEMENT): Filter Assistant window is to small by default
Issue #86185 (ENHANCEMENT): Please translate few sections in Classification 2.0 search
Issue #86257 (ENHANCEMENT): Wrong translation in PARTdatamanager -> Document scan
Issue #86375 (ENHANCEMENT): History is now called "Opened projects"
Issue #86515 (ENHANCEMENT): Vertical table- improve look of active value on hover
Issue #86523 (ENHANCEMENT): V11 Partview Table: No comment like in V10 if you type wrong value
Issue #87495 (ENHANCEMENT): PARTdataManager: Translation needed
Issue #87881 (ENHANCEMENT): Text orientation in table
Issue #87959 (ENHANCEMENT): V11 - Topology - German translation of conditions
Issue #88313 (ENHANCEMENT): Add some no results hints for partial search
Issue #88389 (ENHANCEMENT): Retrieve favicon only if needed
Issue #88449 (ENHANCEMENT): Compare: Possible to join the first two columns?
Issue #88473 (ENHANCEMENT): Compare: Loading three parts via file and then switching visibility 1/2 does not work
Issue #88487 (ENHANCEMENT): Better filter assistant layout to view complete slider as long as possible
Issue #88805 (ENHANCEMENT): Delivery Countries
Issue #88811 (ENHANCEMENT): Partition Map - Actions on selected groups
Issue #88979 (ENHANCEMENT): PARTdataManager Load from CAD is missing in Part comparison
Issue #89107 (ENHANCEMENT): Translate option in Settings
Issue #89237 (ENHANCEMENT): Change EOL per line implementation to refer the source project in varset modifier
Issue #89397 (ENHANCEMENT): keys in menuvisibility_PARTdatamanager.cfg should be updated
Issue #89909 (ENHANCEMENT): Configurable docking windows VBS API enhancements
Issue #90209 (ENHANCEMENT): Sketch search - translation missing
Issue #90627 (ENHANCEMENT): View menu: Item "Thread on/off" still needed?
Issue #90717 (ENHANCEMENT): Unexpected results when filtering PSOL table with values containing "-"
Issue #90887 (ENHANCEMENT): Clarify tooltip text of button DIN962
Issue #91339 (ENHANCEMENT): Adding variants with Shift+click disabled in V11
Issue #91701 (ENHANCEMENT): Enhance MIDENT open script to only open the part if the exact line was found (optionally)
Issue #92061 (ENHANCEMENT): Search settings: Remove options "Search in" "all catalogs" and "all classifications"
Issue #92331 (ENHANCEMENT): Full-Text-Search - Mouse over tool tip with possible search operators
Issue #92561 (ENHANCEMENT): New search field enhancement
Issue #92857 (ENHANCEMENT): Selecting projects does not change view in Part selection
Issue #93263 (ENHANCEMENT): Add proxy to raise docking
Issue #93347 (ENHANCEMENT): add size-dependent option to classification 2.0 search
Issue #94157 (ENHANCEMENT): 3d View transparency scale slider looks inactive
Issue #94171 (ENHANCEMENT): Automatic 3D Dimension - Incorrect position of dimensions.
Issue #94271 (ENHANCEMENT): PSOL v11sp3 – PARTdatamanager - Translations
Issue #94291 (ENHANCEMENT): Switch the icons for DETAILS and TABLE in search tab
Issue #94433 (ENHANCEMENT): PARTdataManager: Wrong spelling "Possbile causes"
Issue #94831 (ENHANCEMENT): Textsearch dropdown not closed if we click on search bar or start a search
Issue #41765 (PROBLEM): No translation for eCl@ss attributes available
Issue #49985 (PROBLEM): Show end of life/replaced parts information in part compare
Issue #54221 (PROBLEM): Script Engine Thread execution exception
Issue #61101 (PROBLEM): Symbol view size slider missing in V10
Issue #63119 (PROBLEM): Color doesn't transfer correct via yellow field in pdatamanager
Issue #73139 (PROBLEM): PART compare , distances in compare not recognized same way in both models
Issue #74435 (PROBLEM): Scrolling in tooltip does not work
Issue #74949 (PROBLEM): Search results missing when switching views during the search
Issue #75247 (PROBLEM): Custom dimensions: minor editing of *.dim files results in pretty different line count
Issue #75731 (PROBLEM): Show only active connection points doesn't work
Issue #80391 (PROBLEM): Fix minor issues with CloudNavigator
Issue #82243 (PROBLEM): Back / forward buttons in search tab do not work as expected
Issue #83117 (PROBLEM): Automatic dimensioning is not saved
Issue #83717 (PROBLEM): "Generate preview per line" does not work
Issue #85331 (PROBLEM): Partial search V11 no selection of faces or planes are possible
Issue #86005 (PROBLEM): Too many STEP formats when loading a step file
Issue #86059 (PROBLEM): Search inside help doesn't work
Issue #86159 (PROBLEM): Percentage info in search result window is not visible enough
Issue #86181 (PROBLEM): Classification 2.0 search; Sheets and Cylinder spring sections doesn't work
Issue #86465 (PROBLEM): layout problem on virtual machine
Issue #86585 (PROBLEM): Opening a new search tab should clear the search, but it's not
Issue #86603 (PROBLEM): no project opening dialog in pdatamgr when package.pdmproxy.core is loaded
Issue #86621 (PROBLEM): widget problem "Aufbau"
Issue #86641 (PROBLEM): Problems with ERP in the vertical table
Issue #86765 (PROBLEM): TopoInfoLoader keeping pdatamgr.exe alive
Issue #87121 (PROBLEM): PARTdatamanager GeoSearch is cut
Issue #87477 (PROBLEM): Part comparison - Problems with align parts position and rotation manually
Issue #87929 (PROBLEM): Additional dockings activation state is not saved
Issue #87975 (PROBLEM): PARTdataManager process not killed when closing V11 SP0 Windows 7
Issue #88613 (PROBLEM): Help window: Search with Search term don't work like expected
Issue #88617 (PROBLEM): If avoided lines are hidden, every second choice in variable of 3D view is not working
Issue #88627 (PROBLEM): PARTdataManager: Use Cases dock should be removed
Issue #88647 (PROBLEM): Price search: Query string concatenation doesn't work
Issue #88913 (PROBLEM): Zoom with mouse wheel-show zooming area in every direction
Issue #88995 (PROBLEM): Pens in options of hpgl are mixed
Issue #89109 (PROBLEM): Disable checkbox to show suppressed formats again if there are no suppressed formats
Issue #89111 (PROBLEM): Search filter generation, translation missing
Issue #89167 (PROBLEM): Stop words not excluded from Din catalog in the tag cloud
Issue #89179 (PROBLEM): When switching from horizontal to vertical table the table view is not updated
Issue #89229 (PROBLEM): Show additional files in original order of PRJ
Issue #89345 (PROBLEM): Some value ranges are not editable
Issue #89457 (PROBLEM): PARTdatamanger - red line in window with possible values
Issue #89493 (PROBLEM): TweakMenu: When you start PARTdataManager sometimes Context menu does not fit to the settings of the role
Issue #89559 (PROBLEM): Search result: position of ERP columns not saved
Issue #89593 (PROBLEM): Layout of details tab is sometimes broken
Issue #89595 (PROBLEM): Popup in suggestion tab cannot be closed
Issue #89665 (PROBLEM): Offline export to AVI, size and resolution
Issue #89741 (PROBLEM): Typing values in filter assistant sets wrong values to slider
Issue #89749 (PROBLEM): Variable description not translated in 3D dimension when changing values
Issue #89925 (PROBLEM): Blank assistants opened in PARTdataManager
Issue #89927 (PROBLEM): Wrong matrix
Issue #90173 (PROBLEM): PARTdataManager - table settings Cancel and Apply buttons inherit wrong style
Issue #90185 (PROBLEM): PARTdataManager - color switching in table
Issue #90247 (PROBLEM): V11 Topology rounds down value in Inch
Issue #90261 (PROBLEM): Links in "Search for unmachined parts" are not working
Issue #90271 (PROBLEM): PARTdataManager - similarity shown 2 times in search results table view
Issue #90287 (PROBLEM): PARTdataManager - bread crumbs and index tree header not customizable via CSS
Issue #90489 (PROBLEM): Test of the replaceStd function using values in the database
Issue #90495 (PROBLEM): Avoid dot/comma conflict in MCD dialog
Issue #90595 (PROBLEM): PARTdataManager Setting - Topology Search: "Recently used" not needed anymore
Issue #90711 (PROBLEM): ERP column image in front of column variable
Issue #90745 (PROBLEM): Clickable dimensions not working with value ranges
Issue #90761 (PROBLEM): Additional file export is not working
Issue #90809 (PROBLEM): Change button "Show/hide lines to be avoided" in PARTdataManager
Issue #90845 (PROBLEM): Filter assistants load search.cfg in main thread
Issue #90905 (PROBLEM): PARTdataManager may crash when moving the mouse ;)
Issue #90929 (PROBLEM): V11sp3 3D view of part is not working
Issue #90957 (PROBLEM): After changing length in 3d view selects a total different line of part
Issue #90997 (PROBLEM): Red marking in "Unmachined / Unfinished part report" does not work
Issue #91111 (PROBLEM): PARTdataManager: memory usage increases when browsing Internet
Issue #91129 (PROBLEM): Crash after you turn of filter and switch to vertical view
Issue #91133 (PROBLEM): How to use license.cfg WARNEXPIRE with V10 / V11
Issue #91161 (PROBLEM): Switching between Layouts for Table and Vertical view is not working anymore after selecting "wrong" Layout
Issue #91251 (PROBLEM): 3D - Zoom on window doesn't work
Issue #91343 (PROBLEM): Crash in price search when closing PARTdataManager
Issue #91365 (PROBLEM): 3D view: Part selection in assembly not possible
Issue #91489 (PROBLEM): New Search Tab starts with last search options
Issue #91513 (PROBLEM): Topology search tooltips: Crash when moving mouse over icon
Issue #91599 (PROBLEM): Offline export - Newer dxf versions missing
Issue #91643 (PROBLEM): Synchronize table header options with table
Issue #91645 (PROBLEM): Measure dialog is unresponsive / does not work
Issue #91687 (PROBLEM): Similar parts are not found with PARTdatamanager
Issue #91691 (PROBLEM): Links in part information do not work anymore
Issue #91779 (PROBLEM): Feature highlighting in tooltip disappears from time to time
Issue #91881 (PROBLEM): Unhandled exception in meta_plm
Issue #91931 (PROBLEM): EOL info missing for ERP lines
Issue #92071 (PROBLEM): Error while installing V11sp3 ISO
Issue #92091 (PROBLEM): Crash when trying to open an assembly and a table could not be loaded correctly
Issue #92223 (PROBLEM): Closing PARTdataManager with opened Measure dialog causing opening warning window.
Issue #92319 (PROBLEM): Switching between projects in class 2.0 is slow
Issue #92371 (PROBLEM): Translation in PARTdataManager
Issue #92401 (PROBLEM): Sketch technical view does not work in 3D tooltip after switching to another and back
Issue #92547 (PROBLEM): Part information/Product name with prefix "-" in sales_offlinecd
Issue #92549 (PROBLEM): PLMTABLE2 column is a combobox in the vertical table
Issue #92645 (PROBLEM): Open Part with MIDENT throws error notification
Issue #92699 (PROBLEM): Search dialogs open on wrong screen
Issue #92863 (PROBLEM): Part unable to load geometry, except in PARTdesigner
Issue #92877 (PROBLEM): Support multiple 3db´s in Class 2.0 projects
Issue #92907 (PROBLEM): Line height of table lines with images can not get as small as without images
Issue #93077 (PROBLEM): Partition map does not work with app server
Issue #93117 (PROBLEM): Filter button not available if filter removes all lines
Issue #93119 (PROBLEM): Range filter does not work in table anymore
Issue #93121 (PROBLEM): Topology column tooltips don´t work in table
Issue #93179 (PROBLEM): Open DIN610 in PARTdataManager throws black screen in 3D view
Issue #93193 (PROBLEM): When trying to type search condition, the line edit is blocked by help tool tip
Issue #93269 (PROBLEM): Inconsistent behavior when checking / unchecking "Show Features in 3D"
Issue #93317 (PROBLEM): Classification 2.0 - check the Plain Shaft, 2-5 levels project
Issue #93345 (PROBLEM): Classification 2.0 search - search pattern / search path
Issue #93361 (PROBLEM): Allow to set lock-state on custom layouts
Issue #93403 (PROBLEM): Window/recover standard does not work anymore
Issue #93415 (PROBLEM): Translation not shown in Classification 2.0 search
Issue #93429 (PROBLEM): Classification 2.0 - search for Fuses gives no results
Issue #93435 (PROBLEM): Classification 2.0 - not so good search results
Issue #93513 (PROBLEM): Problems editing value in tab gui
Issue #93657 (PROBLEM): Check: save/edit filter assistants / class 2.0 projects
Issue #93659 (PROBLEM): Languages appear twice in filter assistant creator
Issue #94105 (PROBLEM): Right click on table row does not work correctly because the table moves
Issue #94197 (PROBLEM): Vertical table view: no confirmation and cancel icons in yellow field selection
Issue #94223 (PROBLEM): LINA is not visible in header-title of table
Issue #94257 (PROBLEM): Script: onPSOLtableLoaded(tab) + columns.add + recalc -> Table view not updated anymore (refresh)
Issue #94287 (PROBLEM): PARTdataManager: "Typical" button in Manage views dialog
Issue #94359 (PROBLEM): Missing image in "Part information" dialog using cadenas_data remotely
Issue #94541 (PROBLEM): Build 166758 - Crash & minidump when opening "DIN Ballengriffe (DIN 39 D)"
Issue #94653 (PROBLEM): When storing search result in favorites in mode parts and part families, information on lines is missing
Issue #94761 (PROBLEM): Wrong handling of some columns in filter assistant creator
Issue #94805 (PROBLEM): Variable search - value disappears if not confirmed by enter
Issue #94833 (PROBLEM): Filter assistant feature does not work properly
Issue #94915 (PROBLEM): Filter assistant resets search criteria after search
Issue #94917 (PROBLEM): Quick table filter - Dot/comma on NumPad
Issue #95369 (PROBLEM): Native catalog: Rows with and without 3D preview; no 3D preview

Issue #88807 (PROBLEM): V11sp2 Connection tool does not work with activated ERP
Issue #90765 (PROBLEM): Connection: ERP functionality not given
Issue #90983 (PROBLEM): PARTconnection showing error messages when filter is active

Issue #93169 (PROBLEM): VBS debugger steps into constructors when stepping out of functions

Issue #19722 (ENHANCEMENT): Delete from PLMTABLE2 when deleting from Linktable using erp_dbedit.vbb
Issue #80201 (ENHANCEMENT): Add some checks in classimporter update process
Issue #88227 (ENHANCEMENT): Can't get the bounding box size from prxAssMainC
Issue #24040 (PROBLEM): Correct resources in erp_sap scripts
Issue #60575 (PROBLEM): Show in keytech
Issue #89417 (PROBLEM): sorttable error
Issue #90691 (PROBLEM): crash show_dbdata.vbb
Issue #91591 (PROBLEM): Disable OK button in custom search until the selection is completed

Issue #91107 (ENHANCEMENT): Pipeline VBS node API for SP3

Issue #78611 (ENHANCEMENT): Improve Start, Pause and Stop icons
Issue #89295 (ENHANCEMENT): update manager: project based mapping
Issue #67537 (PROBLEM): Field/column name search is not working
Issue #68359 (PROBLEM): PARTdataCenter not all numbers found depends on sign in front of number
Issue #92683 (PROBLEM): Unable to complete mapping

Issue #83571 (ENHANCEMENT): There are many conversion errors

Issue #86479 (ENHANCEMENT): Intermediate commits in Pipeline PARTsolutions catalog export node
Issue #86483 (ENHANCEMENT): Support explicit removal of products and classes in Pipeline PARTsolutions catalog export node
Issue #86521 (ENHANCEMENT): Generate previews (Product, Project, Directory)
Issue #86651 (ENHANCEMENT): Ensure compatibility with previous ClassImporter catalogs
Issue #93211 (PROBLEM): Add support for classifications

Issue #78305 (ENHANCEMENT): Add comments to PARTwareHouse IDL files to generate VBS docs
Issue #80021 (ENHANCEMENT): Distributed pipeline on top of the job engine
Issue #91939 (PROBLEM): Define licenses for PARTwareHouse and classify
Issue #94605 (PROBLEM): Check PARTwareHouse licenses

Issue #86453 (ENHANCEMENT): Add scripting interface for pipelines

Issue #80929 (ENHANCEMENT): Add manual class selection to classification wizard
Issue #86427 (ENHANCEMENT): Change class selection in classification wizard
Issue #86695 (ENHANCEMENT): Downward compatibility of pipelines
Issue #87775 (ENHANCEMENT): Pipelines on server UI integration
Issue #89387 (ENHANCEMENT): Pipeline editor enhancements
Issue #62321 (PROBLEM): PARTdataCenter new catalogs icon always displayed
Issue #91857 (PROBLEM): PARTdataCenter UI hangs while loading products
Issue #91981 (PROBLEM): Rework startup page
Issue #93143 (PROBLEM): Sort filter categories and filters by name
Issue #93147 (PROBLEM): Enhance pipeline option selection widget
Issue #94663 (PROBLEM): PDataCenter: Problems with opening the Product View

Issue #44581 (ENHANCEMENT): Check if parts/assemblies still available in PLM
Issue #49379 (ENHANCEMENT): PLMSynchro: SAP Classification importer (incl. Delta recognition)
Issue #55717 (ENHANCEMENT): PLMsynchro FSO with Solidworks - Forming Tool Part could not be imported
Issue #79495 (ENHANCEMENT): plmsynchro: Attribute types
Issue #82411 (ENHANCEMENT): Add Embeded/Virtual Flag in PLMsynchro
Issue #86077 (ENHANCEMENT): PLMsync/SOLIDWORKS: Fix import creating a project with the wrong name
Issue #86221 (ENHANCEMENT): PLMsync/PW: Add Templates for the typical plmsynchro runs
Issue #86223 (ENHANCEMENT): PLMsync/PW: Allow configuration of the PDM proxy from the PW UI
Issue #86225 (ENHANCEMENT): PLMsync/PW: Pass settings from one node to another node
Issue #86227 (ENHANCEMENT): PLMsync/PW: Check for free space when selecting a target folder
Issue #86231 (ENHANCEMENT): PLMsync/PW: Simplify conversion path
Issue #86239 (ENHANCEMENT): PLMsync/PW: Add support for family tables
Issue #86289 (ENHANCEMENT): PLMsync/PW: Nightupdate
Issue #86449 (ENHANCEMENT): PLMsync/PW: Meta-Issue
Issue #86551 (ENHANCEMENT): Catalog structure derivation from PLMsynchro documents
Issue #86649 (ENHANCEMENT): Create PLMsynchro wizard
Issue #86657 (ENHANCEMENT): Job engine enhancements for PLMsynchro
Issue #87587 (ENHANCEMENT): Support expandable documents in pipeline
Issue #87647 (ENHANCEMENT): PLMsync/PW: Pass filter from query to download to conversion
Issue #88267 (ENHANCEMENT): PLMsync/PW: Previews per Project
Issue #88365 (ENHANCEMENT): Implement ERP support in pipeline branch
Issue #88369 (ENHANCEMENT): Create pipeline node to derive PSol catalog structure from PLMSynchro documents
Issue #91303 (ENHANCEMENT): Create attribute modification filter
Issue #93467 (ENHANCEMENT): Dashboard: Show complete progress when possible
Issue #93469 (ENHANCEMENT): Dashboard: Rerun reported items
Issue #93471 (ENHANCEMENT): Dashboard: Reload time and countdown
Issue #94441 (ENHANCEMENT): Store runtime data history
Issue #94607 (ENHANCEMENT): Dashboard: Add host and timestamp to reports
Issue #94611 (ENHANCEMENT): Dashboard: Export reports as CSV
Issue #55711 (PROBLEM): PLMsynchro FSO with Solidworks - Library Feature Parts could not be imported
Issue #60531 (PROBLEM): Check if file exists before calling translator line
Issue #73645 (PROBLEM): PLMsynchro - units not imported correctly
Issue #80331 (PROBLEM): $ causing problems in PLMsynchro import
Issue #82413 (PROBLEM): PLMsynchro FSO Solidworks, import broken in PSOL11
Issue #87205 (PROBLEM): plmsynchro inch units wrong dimensions stp to partjava - V11SP0
Issue #87331 (PROBLEM): Check PLMsynchro license in pipeline
Issue #87353 (PROBLEM): PLMsynchro Test without Parasolid license
Issue #89297 (PROBLEM): PLMSynchro - Capvidia import of inch parts is 25.4 times smaller
Issue #89319 (PROBLEM): PLMsynchro - Inventor, Units not converted/imported correctly
Issue #92099 (PROBLEM): Add API to set total count of items and provide this information in the web service
Issue #92619 (PROBLEM): PLMsynchro wizard - data source selection issues
Issue #92711 (PROBLEM): PLMsynchro pipeline - catalog name not shown in wizard summary
Issue #92737 (PROBLEM): PLM Synchro Wizard - can not decrease the size of window, can not press FINISH to save process
Issue #93023 (PROBLEM): PARTdatacenter: PLMS needs a VBS function to copy objects
Issue #93461 (PROBLEM): Implement Dashboard Design
Issue #93463 (PROBLEM): Dashboard: Overview table - Disable table scrolling with mouse, initial sort / save sort, select current line, break-word
Issue #93465 (PROBLEM): Dashboard: When clicking on reports, errors or warnings in the overview table, directly jump to the list
Issue #93771 (PROBLEM): PLMsynchro - STEP file import broken
Issue #94015 (PROBLEM): sitesetup ignored
Issue #94021 (PROBLEM): catalog not visible after plms
Issue #94199 (PROBLEM): Duplicated pipeline disappears when destination catalog is changed
Issue #94277 (PROBLEM): Add timestamp/computer name to report items
Issue #94403 (PROBLEM): Fingerprints not shown in PLMsynchro catalogs imported via pipeline
Issue #94569 (PROBLEM): Error Notification after click on PLM Synchro Button
Issue #94735 (PROBLEM): License for PSworker is not working
Issue #94819 (PROBLEM): Pausing and resuming pipelines on server breaks execution
Issue #94829 (PROBLEM): SW ePDM: API fails in side-thread
Issue #95093 (PROBLEM): Topo fingerprints sometimes missing when using plmsynchro

Issue #86441 (ENHANCEMENT): Run and manage pipelines on the server
Issue #86447 (ENHANCEMENT): Persist pipeline progress and resume execution

Issue #85535 (ENHANCEMENT): Classification wizard UI rework
Issue #86435 (ENHANCEMENT): Pipelines infrastructure enhancements for PLMsynchro
Issue #86445 (ENHANCEMENT): Add progress information to pipelines
Issue #86451 (ENHANCEMENT): Add report collecting node to pipeline which can store redo information
Issue #86455 (ENHANCEMENT): Enhance workload in pipeline
Issue #88765 (ENHANCEMENT): Support complex attributes in classification wizard
Issue #89039 (ENHANCEMENT): Training set based classification tool
Issue #90655 (ENHANCEMENT): Restructure psol catalogs based on classing results
Issue #90987 (ENHANCEMENT): Support family tables in classification wizard
Issue #92939 (ENHANCEMENT): PLMsynchro pipeline - rename process from context menu
Issue #92963 (ENHANCEMENT): PLMsynchro pipeline - choosing to make a group query deletes existing query
Issue #87053 (PROBLEM): PARTdataCenter - Catalog description missing
Issue #87915 (PROBLEM): change of technical view doesn't change the view name
Issue #91629 (PROBLEM): PARTdataCenter Compare with Training Set is not working
Issue #91801 (PROBLEM): PARTdataCenter Tab "Classing Results" List view is not working
Issue #92793 (PROBLEM): PLMsynchro pipeline - SearchBasePath needs to be manually enabled in padmin
Issue #92925 (PROBLEM): Import PDM documents from classification wizard
Issue #93165 (PROBLEM): PARTdatacenter - add edit PLM process button to toolbar
Issue #94121 (PROBLEM): Check synonym usage in classification wizard
Issue #94609 (PROBLEM): Check classification wizard licences
Issue #95213 (PROBLEM): PLMsynchro pipeline - importing 10k STEPs, at some point it gets stuck

Issue #73783 (ENHANCEMENT): CAD proxy: Don't recalc all attributes when fetching the value of one attribute
Issue #83991 (ENHANCEMENT): CadProxies: AddAttribute & Family Instances
Issue #84003 (ENHANCEMENT): Catia: AddAttribute & Family Instances
Issue #84185 (ENHANCEMENT): CadProxies: Test For AddAttribute Implementations
Issue #84579 (ENHANCEMENT): CadProxies: Review GetAttributes (Combined, NonCombined)
Issue #84941 (ENHANCEMENT): SolidEdge: Revise CAD proxy
Issue #85135 (ENHANCEMENT): SolidWorks/CAD Proxy: Replace in unsaved assemblies
Issue #85207 (ENHANCEMENT): Automated Test: Confirm scaling of STLs work
Issue #85265 (ENHANCEMENT): Selection: Unify implementation across the CADs
Issue #85285 (ENHANCEMENT): Handling of missing subparts in assemblies with PLMsynchro
Issue #86353 (ENHANCEMENT): Catia: Support Of Partially Loaded Geometries.
Issue #88403 (ENHANCEMENT): parallel conversion of cad files
Issue #88581 (ENHANCEMENT): PLMsync/SE: Conversion of a family with many members takes a very long time
Issue #88729 (ENHANCEMENT): Inventor : parallel conversion of cad files
Issue #91359 (ENHANCEMENT): Proxies: Add Possibility to disable interactive selection in GUI Handlers
Issue #91879 (ENHANCEMENT): Add Entry Point To Deliver Value If A Cylinder Or Cone Face Is Inner Or Outer
Issue #81811 (PROBLEM): CadMgr: Catia dead-locks on startup
Issue #87921 (PROBLEM): CadProxies : Creo : add cfg option to deactivate "animation" when loading part
Issue #88893 (PROBLEM): CAD Proxy/SolidEdge: Replacing instances fails after the first time
Issue #94319 (PROBLEM): SolidEdge: Customer data fails conversion

Issue #91891 (PROBLEM): Update Capvidia SDK to version 3.6
Issue #92095 (PROBLEM): Handling of threads in Capvidia import
Issue #92209 (PROBLEM): Split generic feature when creating features from Capvidia part
Issue #92543 (PROBLEM): 3rdPartyInfo cfg shows old version of Capvidia SDK
Issue #92917 (PROBLEM): Capvidia: Update to SDK 3.6 r171006

Issue #29311 (ENHANCEMENT): Create concept for full support of DIN32869 (publications)
Issue #33857 (ENHANCEMENT): Change PLM_useVersionInPlmtable2forCheckout to 1 for all default configs
Issue #37883 (ENHANCEMENT): Create descriptions for layer in CAD CFG's
Issue #58133 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions)
Issue #62571 (ENHANCEMENT): PART compare error if interface is unregistered
Issue #62765 (ENHANCEMENT): Cad/PDM generation Server
Issue #66283 (ENHANCEMENT): create geometrical variant
Issue #71253 (ENHANCEMENT): Redo the message window in SW from replace features
Issue #73473 (ENHANCEMENT): PDM Login dialog not completely translated in English
Issue #74243 (ENHANCEMENT): ifagile.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74247 (ENHANCEMENT): ifcatia.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74263 (ENHANCEMENT): ifcdb.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74275 (ENHANCEMENT): ifdscsapplm.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74283 (ENHANCEMENT): ifinsight.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74295 (ENHANCEMENT): iflca.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74387 (ENHANCEMENT): ifsapplm.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74391 (ENHANCEMENT): ifsmarteam.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74399 (ENHANCEMENT): ifswenterprisepdm.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74407 (ENHANCEMENT): ifvault.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74411 (ENHANCEMENT): ifwwgm.cfg should be improved for better usability in PARTconfig Editor V2
Issue #74541 (ENHANCEMENT): sapplm_public_api.cfg should be improved for better usability in PARTconfig Editor V2
Issue #76073 (ENHANCEMENT): NX part tree selection and choose procedure dialog when replacing
Issue #77543 (ENHANCEMENT): create geometrical variant -> Create icon/Button/UI for PARTdataManager
Issue #79439 (ENHANCEMENT): Parallel use of AutoCAD and Creo doesn't work
Issue #81251 (ENHANCEMENT): Test behavior of interfaces when variables point to wrong location
Issue #82919 (ENHANCEMENT): Q&S BadStep handling Base Issue
Issue #83393 (ENHANCEMENT): CAD Proxies Extensions Geometry Proxy/Partial Search
Issue #83483 (ENHANCEMENT): Test possibility to deliver models for bricsCAD
Issue #84301 (ENHANCEMENT): Use View Matrix in PSOL for 3d orientation after export
Issue #85633 (ENHANCEMENT): Change design of preferred rows filter button in seamless window
Issue #86895 (ENHANCEMENT): Add new buttons for event handling in CAD UI
Issue #86971 (ENHANCEMENT): Allow fall back for rawmaterials and nosection for custom settings
Issue #87291 (ENHANCEMENT): COM adapter: Handle "Application is Busy" and "Call was Rejected By Callee" errors
Issue #87421 (ENHANCEMENT): Interface icon of geosearch is very different to seamless icon
Issue #87521 (ENHANCEMENT): parts4cad: Cad Replace process should be able to handle seamless/pdatamanager combination
Issue #87633 (ENHANCEMENT): Add possibility to specify attribute units in Attribute Mapping Section
Issue #88089 (ENHANCEMENT): *.e3d
Issue #88465 (ENHANCEMENT): Live search lite / save : Provide OnSave Event as prototype
Issue #88471 (ENHANCEMENT): Geosearch (LIVEsearch) on Save
Issue #89279 (ENHANCEMENT): Rework common CAD Dialogs
Issue #90439 (ENHANCEMENT): Use unique name for LIVEsearch feature
Issue #90685 (ENHANCEMENT): Pattern Replace Dialog is not default in all Cad´s
Issue #90719 (ENHANCEMENT): P&G: Create possibility to set a default value for quantity
Issue #91025 (ENHANCEMENT): Pattern Dialog is maybe not so good
Issue #91733 (ENHANCEMENT): genericproxyformats translator needs to be multi-process capable
Issue #91913 (ENHANCEMENT): Dassault 3DExperience PDM Interface for Solidworks
Issue #65849 (PROBLEM): "Search for unmachined parts" and "Geosearch" does not switch to PARTdatamanager if app is in the background
Issue #75825 (PROBLEM): NX, trying to edit exported psol assembly gives complicated message
Issue #84525 (PROBLEM): Placement strategy when current document has MIDENT
Issue #84707 (PROBLEM): Login is not working on http://b2b.beta.partcommunity.com
Issue #86007 (PROBLEM): Test if zoom to conecction point works in all cases
Issue #86261 (PROBLEM): Exploded view is exported also exploded to CAD
Issue #86405 (PROBLEM): Common : interface not translated completely
Issue #87893 (PROBLEM): Dimension Annotation use non existing connection points
Issue #88719 (PROBLEM): A line in seamless.cfg is not commented correctly
Issue #90003 (PROBLEM): no focus change after partial search
Issue #90227 (PROBLEM): Live Search not active after start
Issue #90851 (PROBLEM): Please check REVIT / SAT Export
Issue #91055 (PROBLEM): Dialog too large
Issue #91217 (PROBLEM): Blend feature - Problems with Powerjacks EMT0300
Issue #91233 (PROBLEM): Blend feature - example 2 - not all blends are generated
Issue #91775 (PROBLEM): Move setting menu in extras
Issue #91805 (PROBLEM): UnitBase in PS3 is incorrect -> Could not load PS3 with template error
Issue #92265 (PROBLEM): Deactivate Export or put O2CConvertObject.exe to ISO as default
Issue #93259 (PROBLEM): "Open component project" dialog - "Remember my choice" setting is only saved for the current session
Issue #93517 (PROBLEM): Creo - Put variable description into cad

Issue #58253 (ENHANCEMENT): SE/Teamcenter pdmproxy installer
Issue #91893 (PROBLEM): Installer: Update Capvidia SDK to version 3.6

Issue #88619 (ENHANCEMENT): Remove "Save as STEP" from PART2cad
Issue #93235 (ENHANCEMENT): Translation is needed

Issue #76719 (ENHANCEMENT): Message in 2D derivation tab could be improved
Issue #79813 (ENHANCEMENT): "Missing search index" message in Seamless search tab can't be closed in Creo
Issue #85709 (ENHANCEMENT): Partial search GUI should open before showing search results
Issue #86433 (ENHANCEMENT): Add horizontal table to seamless
Issue #86711 (ENHANCEMENT): Don´t show variables from custom search in seamless window
Issue #86873 (ENHANCEMENT): Seamless icon not updated
Issue #87207 (ENHANCEMENT): parts4cad: Show information message after installation
Issue #87209 (ENHANCEMENT): parts4cad: Change title of "Seamless" to "parts4cad"
Issue #87211 (ENHANCEMENT): parts4cad: User registration, EULA
Issue #87235 (ENHANCEMENT): parts4cad: Change Revit menu to "BIMcatalogs"
Issue #87325 (ENHANCEMENT): parts4cad: Logo on installer start screen
Issue #87343 (ENHANCEMENT): parts4cad: Position seamless window over Revit
Issue #87351 (ENHANCEMENT): parts4cad: dynamic value ranges (ruler) missing
Issue #87355 (ENHANCEMENT): parts4cad: disable "pool" usage
Issue #87383 (ENHANCEMENT): parts4cad: orphaned "pseamless.exe" after closing CAD
Issue #87471 (ENHANCEMENT): Check if CAD systems keep a reference to seamless
Issue #87545 (ENHANCEMENT): LIVEsearch window opens on main screen and can´t be displaced
Issue #87643 (ENHANCEMENT): parts4cad: Version numbering
Issue #87769 (ENHANCEMENT): parts4cad: initial window size
Issue #87987 (ENHANCEMENT): parts4cad: Terms of use translation
Issue #88055 (ENHANCEMENT): parts4cad: pool-path from sitesetup does not exist / is not created from installer
Issue #88333 (ENHANCEMENT): parts4cad: setup needs to allow "install for ALL users"
Issue #88579 (ENHANCEMENT): parts4cad / seamless remove "always on top" flag after exporting
Issue #88665 (ENHANCEMENT): parts4cad revit: renaming of the "cadenas.addin" file
Issue #88689 (ENHANCEMENT): parts4cad: Customer specific installations
Issue #88887 (ENHANCEMENT): parts4cad: Opt-In / Double-Opt-In
Issue #89027 (ENHANCEMENT): parts4cad: Different user directory for each parts4cad
Issue #89317 (ENHANCEMENT): Seamless - 2 settings icon in same time
Issue #89813 (ENHANCEMENT): Add topo values widget to seamless
Issue #90155 (ENHANCEMENT): Enhance live search settings
Issue #90405 (ENHANCEMENT): parts4cad: Hide supplier filter
Issue #90409 (ENHANCEMENT): parts4cad: Remove variable search
Issue #90437 (ENHANCEMENT): "Close popup after" setting enhancement
Issue #90445 (ENHANCEMENT): parts4cad: Reduce installation dialogs
Issue #90461 (ENHANCEMENT): Seamless - partial search layout issue, first column too narrow
Issue #90487 (ENHANCEMENT): parts4cad: "Sensed" Speedup - Only hide instead of closing and show splash screen
Issue #91095 (ENHANCEMENT): Add BETA text to menu and caption for first version
Issue #91117 (ENHANCEMENT): parts4cad: Show additional tab Help/Update
Issue #93079 (ENHANCEMENT): Please rename warning window for closing seamless
Issue #59349 (PROBLEM): Seamless can crash if the window is closed while loading a project
Issue #86699 (PROBLEM): Livesearch with Creo3: Problem when editing Features
Issue #87323 (PROBLEM): parts4cad: Update Installation
Issue #87339 (PROBLEM): Detection of other CADENAS plugins has false positives
Issue #87427 (PROBLEM): parts4cad: loading assemblies again may fail
Issue #87679 (PROBLEM): When search dialog is open in seamless, it is possible to open another search dialog
Issue #87937 (PROBLEM): parts4cad fatal error in Revit after update
Issue #88027 (PROBLEM): parts4cad installer language - choose german, stays on english
Issue #88029 (PROBLEM): parts4cad translation
Issue #88033 (PROBLEM): parts4cad wrong publisher name
Issue #88071 (PROBLEM): parts4cad error during transfer to CAD
Issue #88079 (PROBLEM): parts4cad - tooltips during search
Issue #88081 (PROBLEM): parts4cad - search in new tab
Issue #88093 (PROBLEM): parts4cad - license error
Issue #88203 (PROBLEM): parts4cad after transfer to CAD, debug notification appears
Issue #88507 (PROBLEM): parts4cad - class 2.0 search not removed
Issue #88659 (PROBLEM): parts4cad: Remove : in groups
Issue #89015 (PROBLEM): Possible crash in LiveSearch
Issue #89307 (PROBLEM): Seamless - because text in tabs not all tabs are visible
Issue #91045 (PROBLEM): Missing translation
Issue #92117 (PROBLEM): If you press F1 in seamless then empty help page will be displayed
Issue #92259 (PROBLEM): Seamless >> PLMTable2DocView : when clicking on the PLMTable2DocView icon nothing happens
Issue #92275 (PROBLEM): Seamless does not terminate if the last embedded window was closed but there are still connections to other processes
Issue #93407 (PROBLEM): Dialog on export not working with seamless
Issue #93845 (PROBLEM): LiveSearch sometimes does not work, fingerprint creation error
Issue #94497 (PROBLEM): Seamless: Links to parts in directory is missing when replacing
Issue #95045 (PROBLEM): Partial search result information is missing when adding search results to part compare in seamless
Issue #95049 (PROBLEM): Script errors in keytech script

Issue #81939 (ENHANCEMENT): Attribute mapping per classification
Issue #89253 (ENHANCEMENT): Prototype: Macro Interface

Issue #75425 (ENHANCEMENT): ArchiCAD: Create ArchiCAD native objects which can be placed automatically
Issue #82455 (ENHANCEMENT): ArchiCAD - attribute mapping for classification
Issue #85543 (ENHANCEMENT): Remove Archicad submenu
Issue #87539 (ENHANCEMENT): Archicad: Q&S BadStep handling
Issue #89745 (ENHANCEMENT): Option in ArchiCAD GSM export dialog is not translated in English
Issue #89633 (PROBLEM): Offline Cd - export to ArchiCAD GSM failed

Issue #88547 (ENHANCEMENT): Installer Autocad 2018

Issue #88543 (ENHANCEMENT): Autocad 2018
Issue #88661 (ENHANCEMENT): Remove native checkin/checkout from Autocad
Issue #91167 (ENHANCEMENT): Error during 2D export / center lines on arcs
Issue #93915 (ENHANCEMENT): Geo imported inch part 2D derivation has too big label in Autocad
Issue #85849 (PROBLEM): Autocad: font size at dimensions is far too big
Issue #91053 (PROBLEM): Autocad 2018 assembly export problem
Issue #91653 (PROBLEM): Dimensions in combinatoric Exports have wrong values.
Issue #92313 (PROBLEM): Autocad NOT Mechanical: Replace all instances does only replace the selected instance
Issue #94417 (PROBLEM): Autocad 2018, New view exports multiple 2D views

Issue #26284 (ENHANCEMENT): Enlarge functionality to use placement dialog in CATIA
Issue #38095 (ENHANCEMENT): Add ifCAD.cfg to copy calculated weight to user attributes
Issue #53511 (ENHANCEMENT): Sketch, circular & matrix pattern insert does not work in CATIA V5-6R24
Issue #71409 (ENHANCEMENT): Add Blend Feature to Catia
Issue #81255 (ENHANCEMENT): Catia - wrong $CADENAS_SETUP causes wrong error message
Issue #83447 (ENHANCEMENT): CATIA: Implement Selection Manager
Issue #89181 (ENHANCEMENT): Catia macro offline export tree not consistent
Issue #89329 (ENHANCEMENT): PSOL Catia Interface V5 Release for PSOL 11
Issue #89641 (ENHANCEMENT): Catia Geosearch (LIVEsearch) on Save / on Change
Issue #89933 (ENHANCEMENT): Implement Partial Search - CATIA V5 interface PSOL11
Issue #90861 (ENHANCEMENT): Catia Pattern Replace Dialog is not default in all Cad´s
Issue #90965 (ENHANCEMENT): Catia icons not up-to-date
Issue #29899 (PROBLEM): Catia native handling from family table parts or parametric parts is wrong
Issue #59107 (PROBLEM): Sweeps defect for qa sample
Issue #72765 (PROBLEM): Catia; warning window during export of negative part from PartDataManager
Issue #76291 (PROBLEM): Catia V5R21 - Scripting notification when trying to use part connection without license
Issue #88955 (PROBLEM): Catia V5-6R25: Placement in PSOL assembly
Issue #88967 (PROBLEM): Catia V5-6R25: "Replace component warning" dialog problem
Issue #89283 (PROBLEM): Catia V5-6R26: Seamless remain active after CAD was terminated
Issue #91009 (PROBLEM): Catia Replace does not send MIDENT to PSOL
Issue #91011 (PROBLEM): when replacing Catia part, links are craching
Issue #91635 (PROBLEM): Add Catia for automated tests
Issue #91767 (PROBLEM): allow "Bad-Step" Q&S exports
Issue #91771 (PROBLEM): Replace/GeoSearch on Context menu
Issue #91773 (PROBLEM): On startup of Catia a console windows appears multiple times
Issue #91795 (PROBLEM): Replace/Geosearch Part without selection lead to crash
Issue #91797 (PROBLEM): Replace Window was hidden (not on top)
Issue #91819 (PROBLEM): Export Handler in Main/ASM/Part environment
Issue #92361 (PROBLEM): Catia Proxy - Error when Part is not found
Issue #92769 (PROBLEM): Catia Blend feature - example 2 - not all blends are generated
Issue #92901 (PROBLEM): Geoimported part could not be exported to CATIA
Issue #93223 (PROBLEM): CATIA V5 - LIVEsearch on CATpart is not responding to changes
Issue #93719 (PROBLEM): CATIA V5R27 - invisible assembly on first export when material transfer is activated in ifcatia
Issue #93733 (PROBLEM): CATIA V5 - CNSMASSEXACT is not transferred correctly

Issue #80915 (PROBLEM): Catia Macro has a problem with patterns

Issue #87115 (ENHANCEMENT): Inventor 2018 Installer

Issue #64823 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions)
Issue #64837 (ENHANCEMENT): Implement Surface Text Attributes
Issue #83381 (ENHANCEMENT): Add Attributes to Inventor Representation (also family table instance)
Issue #84001 (ENHANCEMENT): Inventor: AddAttribute & Family Instances
Issue #84139 (ENHANCEMENT): Inventor: Use of Assets (as of Inventor 2014) also for face colors
Issue #84265 (ENHANCEMENT): Inventor Q&S BadStep handling
Issue #85053 (ENHANCEMENT): Inventor 2015 error place on circle
Issue #85143 (ENHANCEMENT): Inventor 2018 release
Issue #85245 (ENHANCEMENT): Inventor: Add attribute of "Catalog Proxy" documents manually
Issue #85677 (ENHANCEMENT): Checkin from Inventor 2016 not working
Issue #87243 (ENHANCEMENT): Inventor: Remove all special code for Inventor < 2014
Issue #87401 (ENHANCEMENT): Inventor: Try to avoid loading of family instances and close opened instance files as quick as possible
Issue #87599 (ENHANCEMENT): Inventor: There must always be two objects selected before Geosearch starts automatically
Issue #88515 (ENHANCEMENT): Subassemblies set to modified when updating mass
Issue #88601 (ENHANCEMENT): Inventor : Geosearch (LIVEsearch) on Save
Issue #89583 (ENHANCEMENT): Inventor: Better performance for PLM Synchro
Issue #90825 (ENHANCEMENT): Native checkin aborts with error
Issue #65299 (PROBLEM): Writing attributes does not work in Inventor
Issue #78541 (PROBLEM): When exporting an assembly to Inventor a dialog appears on saving the assembly (WWGM)
Issue #85613 (PROBLEM): Inventor, closing placement dialog causes scripting error messages
Issue #86943 (PROBLEM): Error when exporting Negative part to Inventor
Issue #87189 (PROBLEM): New V11 Inventor Addon - Inventor 2016 crashes while moving sketch
Issue #87575 (PROBLEM): Inventor: Geosearch does not work on Assemblies which contain only subassemblies
Issue #87613 (PROBLEM): Inventor: Preselected root assembly will not be used for Geosearch
Issue #89101 (PROBLEM): Problem with placement of geo-imported part in Inventor 2016
Issue #92195 (PROBLEM): Inventor: Add Entry Point To Deliver Value If A Cylinder Or Cone Face Is Inner Or Outer
Issue #93249 (PROBLEM): Inventor: Cylinder face will not be highlighted when selected
Issue #93683 (PROBLEM): Inventor - a special sequence of actions hard crashes Seamless
Issue #93957 (PROBLEM): Inventor, multiple placement of countersunk bolts
Issue #94253 (PROBLEM): Inventor 2018 - use cad placement method

Issue #94055 (ENHANCEMENT): Create and test NX 12 interface Installer

Issue #22413 (ENHANCEMENT): Implement Surface Text Attributes
Issue #46409 (ENHANCEMENT): Improve error message processing in the NX interface
Issue #46725 (ENHANCEMENT): Restore constraints when assemblies are replaced
Issue #50321 (ENHANCEMENT): Problems with NX CAD Proxy part family access (continued)
Issue #71219 (ENHANCEMENT): remove native export with geo creation
Issue #73985 (ENHANCEMENT): UGNX: Improve Cad Proxy Attribute Retrieval
Issue #78139 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions)
Issue #80819 (ENHANCEMENT): NX Placement dialog tooltip not consistent
Issue #83695 (ENHANCEMENT): Partial search in NX, feature selection not implemented
Issue #83995 (ENHANCEMENT): UGNX: AddAttribute & Family Instances
Issue #84261 (ENHANCEMENT): NX Q&S BadStep handling
Issue #84803 (ENHANCEMENT): NX CAD Proxies Extensions Geometry Proxy
Issue #86607 (ENHANCEMENT): NX: Use View Matrix in PSOL for 3d orientation after export
Issue #88599 (ENHANCEMENT): NX : Geosearch (LIVEsearch) on Save
Issue #90857 (ENHANCEMENT): NX Pattern Replace Dialog is not default in all Cad´s
Issue #90955 (ENHANCEMENT): P&G: Create possibility to set a default value for quantity
Issue #92107 (ENHANCEMENT): Add Entry Point To Deliver Value If A Cylinder Or Cone Face Is Inner Or Outer (NX)
Issue #92605 (ENHANCEMENT): Right-click context menu contents
Issue #93709 (ENHANCEMENT): Create and test NX 12 interface
Issue #94193 (ENHANCEMENT): Improve setting the Teamcenter default folder
Issue #85261 (PROBLEM): Parametric native check in doesn't work
Issue #87341 (PROBLEM): Remove activeXSeamless registration check from NX cfg
Issue #87553 (PROBLEM): NX fails negative CAD Selection proxy tests
Issue #90291 (PROBLEM): Setting target limit for hinge joints is incorrect (NX MCD)
Issue #90499 (PROBLEM): NX Hole pattern fails with an AHP cylinder
Issue #90569 (PROBLEM): Problem in add component process
Issue #91201 (PROBLEM): Blend feature - not all blends are generated in NX11
Issue #92137 (PROBLEM): 2D placement doesn't work in NX11.0.2, still works in NX 10.0.3
Issue #92167 (PROBLEM): Native check out of part family members causes an NX crash
Issue #92309 (PROBLEM): If translator module is missing in NX installation, log error
Issue #92453 (PROBLEM): NX LIVEsearch toggle does not work
Issue #93423 (PROBLEM): Clicking a PSOL menu button repeatedly causes NX to crash
Issue #93671 (PROBLEM): Assembly templates are not recognized during Teamcenter export
Issue #94053 (PROBLEM): UGNX - Export with CAD add component dialog opened does not work
Issue #94535 (PROBLEM): Can't export to NX when a native dialog is open
Issue #95009 (PROBLEM): Switching work part to a non-descendant of the current root part causes errors in NX10

Issue #72253 (ENHANCEMENT): OSDM: Idea: Reuse Sketch Plane In Geometry Export To Improve Overall Speed In Windchill Environment
Issue #84529 (ENHANCEMENT): OSDM: AddAttribute & Family Instances
Issue #85797 (ENHANCEMENT): OSDM: Port STEP Export from default to granite kernel to improve results
Issue #86025 (ENHANCEMENT): OSDM: Suspend LiveSearchEvents during Export, Replace, Place And Placement Dialog
Issue #88039 (ENHANCEMENT): OSDM: Blend Features Review
Issue #88209 (ENHANCEMENT): OSDM: Change position_pa to pos_dynamic
Issue #76877 (PROBLEM): Creo Elements Direct Modeling - ps3 file could be loaded without any license
Issue #85687 (PROBLEM): Error when you want to replace part and select it in 3D view
Issue #86149 (PROBLEM): OSDM: NativeCheckin Of Q&S Part Doesn't Run
Issue #89199 (PROBLEM): Creo Direct Modeling - Q&S replace not working
Issue #94249 (PROBLEM): CreoDM 20 - use cad placement method

Issue #89221 (ENHANCEMENT): Creo DM - offline export - version 20 is missing from options
Issue #89733 (ENHANCEMENT): Offline export - OSDM 20 missing from dropdown

Issue #83993 (ENHANCEMENT): Creo: AddAttribute & Family Instances
Issue #84689 (ENHANCEMENT): Creo: Assign Units To Parameters if informations are available in MetaFile
Issue #85361 (ENHANCEMENT): initialize CAD interface after first click on toolbar
Issue #86609 (ENHANCEMENT): Pro-E : Use View Matrix in PSOL for 3d orientation after export
Issue #87059 (ENHANCEMENT): LiveSearch with Creo2: STL too detailed
Issue #87315 (ENHANCEMENT): Interface icon resolution too low/pixelated in Creo Parametric 4.0
Issue #87677 (ENHANCEMENT): Create Cosmetic Threads in Creo using ProFeatureCreate(WithOptions)
Issue #87777 (ENHANCEMENT): Creo: Redesign Chamfer / Round Feature Generator after MetaApi Update
Issue #88593 (ENHANCEMENT): Creo Geosearch (LIVEsearch) on Save
Issue #91817 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions) enhancement
Issue #91965 (ENHANCEMENT): Patterns not correct on several parts
Issue #92059 (ENHANCEMENT): Placement of drillings not correct
Issue #93983 (ENHANCEMENT): Creo - placement in pattern cancel does not work
Issue #86573 (PROBLEM): Internal name of register card "page_Layout_control_btn"
Issue #87309 (PROBLEM): Creo: Assigned Attribute with wrong data type to conic threads
Issue #87497 (PROBLEM): Export of threads - warning
Issue #88183 (PROBLEM): $CADENAS_SETUP - change in environment variable shows no error in Creo
Issue #88231 (PROBLEM): Put all construction objects on a specific layer
Issue #89233 (PROBLEM): Creo 4 - Replace in current asm and all subasm regeneration failed
Issue #89309 (PROBLEM): Creo Parametric - GeoSearch only works in one window when 2 documents are opened

Issue #89711 (PROBLEM): Offline export - Creo 4 does not work

Issue #78465 (ENHANCEMENT): RFA - shared parameters
Issue #85315 (ENHANCEMENT): Revit export - Classification numbers / attributes
Issue #85495 (ENHANCEMENT): Revit constraint / mating of placement connection point to defined reference plane
Issue #87357 (ENHANCEMENT): revit (parts4cad) window with "family in family" placement flipped
Issue #87537 (ENHANCEMENT): Revit : Q&S BadStep handling
Issue #88347 (ENHANCEMENT): Revit 2018
Issue #88377 (ENHANCEMENT): Revit 2018 Installer
Issue #88393 (ENHANCEMENT): Revit export of (inch) documents
Issue #88565 (ENHANCEMENT): parts4cad: Revit 2018 Installer
Issue #90169 (ENHANCEMENT): Revit: create connection points on reference planes
Issue #90199 (ENHANCEMENT): possibility to add description to attribute and transfer this into the cad
Issue #90215 (ENHANCEMENT): revit: maximum filename length
Issue #90695 (ENHANCEMENT): nested RFA - parameter routing
Issue #92295 (ENHANCEMENT): RFA - family category to be set?
Issue #93735 (ENHANCEMENT): Connector Parameters need unit conversions
Issue #94165 (ENHANCEMENT): remove URL www.cadenas.de in standard parameters
Issue #94729 (ENHANCEMENT): Model of door does not cut out the correct size of the door out of the wall in Revit
Issue #94385 (PROBLEM): Analyze RFA/BIM Files Import
Issue #94521 (PROBLEM): Set Enumerated Value Parameters To Strings.

Issue #87161 (ENHANCEMENT): Installer: SolidEdge: Revise CAD proxy
Issue #90877 (ENHANCEMENT): Installer for 11.00 SP3: SolidEdge ST 10 available
Issue #87687 (PROBLEM): remove SE ST5 and lower from installer

Issue #19924 (ENHANCEMENT): Create integrated seamless interface
Issue #22412 (ENHANCEMENT): Implement Surface Text Attributes
Issue #79157 (ENHANCEMENT): Partial Search / Allow Mesh info on selected face Solid Edge
Issue #82389 (ENHANCEMENT): %CADENAS_SETUP% wrong, message in german
Issue #83395 (ENHANCEMENT): Solid Edge CAD Proxies Extensions Geometry Proxy
Issue #83997 (ENHANCEMENT): Solid Edge: AddAttribute & Family Instances
Issue #84253 (ENHANCEMENT): Solid Edge Q&S BadStep handling
Issue #86611 (ENHANCEMENT): Solid Edge: Use View Matrix in PSOL for 3d orientation after export
Issue #88591 (ENHANCEMENT): Solid Edge Geosearch (LIVEsearch) on Save
Issue #90713 (ENHANCEMENT): Solid Edge ST 10 available
Issue #90855 (ENHANCEMENT): Solid Edge Pattern Replace Dialog is not default in all Cad´s
Issue #92029 (ENHANCEMENT): Error message from Solid Edge ST8 after closing Solid Edge ST8
Issue #93443 (ENHANCEMENT): SolidEdge ST10 - double placement for assembly or part
Issue #93991 (ENHANCEMENT): Solid Edge - placement in pattern cancel does not work
Issue #56661 (PROBLEM): Checkout for family instances does not open the correct instance
Issue #80707 (PROBLEM): Solid Edge placement on the inner rim of a chamfer does not work
Issue #83745 (PROBLEM): Error in SolidEdge selection filters code
Issue #84811 (PROBLEM): Placement planar face bolt on inner edge of draft hole gives no warning, placement is not done
Issue #85715 (PROBLEM): W and BA threads (information) are not exported to CAD
Issue #85871 (PROBLEM): Replace error
Issue #87029 (PROBLEM): Placement on 2 different patterns at the same time in Solid Edge ST9 not working
Issue #88685 (PROBLEM): Solid Edge partial search, trying to search with no selection
Issue #88695 (PROBLEM): Solid Edge partial search, inner contours does not work
Issue #89481 (PROBLEM): SE/CAD Proxy: Mident can contain double backslashes
Issue #90299 (PROBLEM): Replacing part will restore window position in Solid Edge
Issue #90743 (PROBLEM): Solid Edge does not create Blend feature on all edges
Issue #91047 (PROBLEM): Exception when replacing in patterns solid edge
Issue #91147 (PROBLEM): Crash in solid edge when exporting twice
Issue #91225 (PROBLEM): Blend feature - example 2 - not all blends are generated in SolidEdgeST8
Issue #91227 (PROBLEM): Blend feature - example 2 - not all blends are generated in SolidEdgeST9
Issue #91971 (PROBLEM): Solid Edge: "Load PS3 file" icon looks corrupted
Issue #92227 (PROBLEM): Some surfaces are not colored in Solid Edge
Issue #92531 (PROBLEM): "Connection tool" not working in st10
Issue #92563 (PROBLEM): Replace will not work, when in fist step no model is selected
Issue #92565 (PROBLEM): Negative Parts insertion into part yields exception
Issue #92631 (PROBLEM): Cannot select conical face when placing screw with conical head
Issue #92725 (PROBLEM): Place PSOL part in PSOL assembly just gives error. No new Doc is opened.
Issue #92743 (PROBLEM): GEOSEARCH not in context menu
Issue #92767 (PROBLEM): Test error in TEST_create_geometry_from_ps3
Issue #92889 (PROBLEM): Context menu activates for illegal selections
Issue #92941 (PROBLEM): 2d export not working
Issue #93083 (PROBLEM): Crash for f0054880301.wkb.ps3
Issue #93509 (PROBLEM): Seamless can not be opened - error pops out
Issue #93885 (PROBLEM): SolidEdge ST10 - values in threads
Issue #94889 (PROBLEM): GEOSEARCH not working for customer part
Issue #95155 (PROBLEM): Title for Seamless wrong in SolidEdge ST8

Issue #92421 (PROBLEM): Create Solidworks 2018 Interface Installer

Issue #26838 (ENHANCEMENT): Solidworks place after closing document brings failure
Issue #60083 (ENHANCEMENT): Possibility to start replace from right mouse in cad Proof of Concept Solidworks
Issue #66029 (ENHANCEMENT): Create Assembly/PART Dimensions´s for CAD (data from 3d dimensions)
Issue #75003 (ENHANCEMENT): PLMsynchro - Solidworks parts with same configuration name are not imported like they should...
Issue #81253 (ENHANCEMENT): SW - wrong $CADENAS_SETUP causes wrong error message
Issue #83397 (ENHANCEMENT): Solidworks CAD Proxies Extensions Geometry Proxy
Issue #83759 (ENHANCEMENT): Partial search in SW, feature selection not implemented
Issue #83999 (ENHANCEMENT): SolidWorks: AddAttribute & Family Instances
Issue #84249 (ENHANCEMENT): Solidworks Q&S BadStep handling
Issue #86335 (ENHANCEMENT): Solidworks : Use View Matrix in PSOL for 3d orientation after export
Issue #86869 (ENHANCEMENT): Parametric export keys - not available in PARTadmin by default
Issue #88605 (ENHANCEMENT): Solidworks : Geosearch (LIVEsearch) on Save
Issue #90721 (ENHANCEMENT): Wrong position in Assembly-Tree (additional requirements)
Issue #90853 (ENHANCEMENT): Solidworks Pattern Replace Dialog is not default in all Cad´s
Issue #93977 (ENHANCEMENT): Solidworks - placement in pattern places part even when canceled
Issue #94305 (ENHANCEMENT): Replace some SW part with a nativecheckin part from pdmanager
Issue #40147 (PROBLEM): Placing of Library Features in assembly/parts brings error message
Issue #65297 (PROBLEM): Writing attributes does not work in SolidWorks
Issue #66927 (PROBLEM): Additional rules with rotation limits don't work in SolidWorks
Issue #86625 (PROBLEM): Insert Standard part during cut depiction of assembly
Issue #87739 (PROBLEM): Remove SolidWorks 2012/2013 from PSOL
Issue #88053 (PROBLEM): Solidworks replace does not work on defect asm project
Issue #88553 (PROBLEM): Deactivated / hidden parts are activated when inserting
Issue #88839 (PROBLEM): SolidWorks - conical threads have no cosmetic threads
Issue #90239 (PROBLEM): Crash when replacing parts in SolidWorks
Issue #90345 (PROBLEM): Multiple selection when replacing part in SolidWorks
Issue #91021 (PROBLEM): SolidWorks - sheet metal part - NativeCheckin problem
Issue #92419 (PROBLEM): Create Solidworks 2018 Interface
Issue #92867 (PROBLEM): Topology Search from CAD - empty dialog in SolidWorks and SolidEdge
Issue #92911 (PROBLEM): PCON drilling not created fully in Solidworks
Issue #92943 (PROBLEM): TopoSearch button is not at correct position in Psol Addin of SW2017
Issue #93501 (PROBLEM): Solidworks 2018 - export of Q&S asembly
Issue #93545 (PROBLEM): Solidworks 2018 - export of Q&S parts to empty asm - parts visible in structure tree only
Issue #93617 (PROBLEM): Solidworks 2018 - use cad placement method
Issue #94315 (PROBLEM): Replace native CAD part from asm with nativecheckin part of same name fails

Issue #71401 (ENHANCEMENT): Add Blend Feature to Solidworks Macro

Issue #89661 (PROBLEM): Offline CD - SW offline export, when wrong version is selected, correct one fails 1 time

Issue #79315 (ENHANCEMENT): VDI 3805 Reader
Issue #86709 (ENHANCEMENT): VDI export name consistent?

Issue #89275 (ENHANCEMENT): Define visual design for common CAD dialogs

Issue #89097 (ENHANCEMENT): PDM : AGILE : support "cancelled" in CREATE & UPDATE

Issue #26946 (ENHANCEMENT): Abort Button in Lock/Wait Dialog does not work
Issue #49263 (ENHANCEMENT): Create server based PDM/CAD process (Base Issue)
Issue #50221 (ENHANCEMENT): PDM Proxies: Improve Performance
Issue #79513 (ENHANCEMENT): Create ARAS PLM VM
Issue #80187 (ENHANCEMENT): Review ARAS PLM interface
Issue #86249 (ENHANCEMENT): TEST : XML comparator ++ adapt PdmProxy tests
Issue #87293 (ENHANCEMENT): TEST : add percentage number compare
Issue #88431 (ENHANCEMENT): PDM : ALL : add option to check for duplicate filenames in CheckinList
Issue #90231 (ENHANCEMENT): pdm.callbackCheckinout object is lost when switching between PARTdatamanager and Seamless
Issue #90563 (ENHANCEMENT): Create server based PDM/CAD process Windchill/Pro-E
Issue #55581 (PROBLEM): PdmProxies : Teamcenter (NX) : problem with download using force=0 if files are already in target folder
Issue #55585 (PROBLEM): PdmProxies : Teamcenter : problem with updated assemblies (objects)
Issue #92047 (PROBLEM): Orange fields get reset (not visible) after export to cad (pdm active)

Issue #82829 (ENHANCEMENT): PDM : PDMPROXIES : SWEnterprisePdm : check if DoucmentPath search with * at the end can be improved
Issue #84603 (ENHANCEMENT): PDM : PDMPROXIES : Add option how to handle missing subparts on conversion
Issue #84615 (ENHANCEMENT): PDM : PDMPROXIES : use PdmLoginService correctly
Issue #84645 (ENHANCEMENT): PDM : PDMPROXIES : SapWebSvc add support for auxiliary files
Issue #84669 (ENHANCEMENT): PDM : PDMPROXIES : SapWebSvc : check and add test for material links + classification data
Issue #87165 (ENHANCEMENT): PDM : PDMPROXIES : SapWebSvc : create tests (data + scripts + result-files)
Issue #91175 (ENHANCEMENT): Define API to get PDMID from active CAD document
Issue #91595 (ENHANCEMENT): PDM : PdmProxies : move persistence code from vbb >> c++
Issue #93391 (ENHANCEMENT): Add progress updates to BatchDownload
Issue #93455 (ENHANCEMENT): Add progress updates to BatchConversion
Issue #76899 (PROBLEM): PDM : PDMPROXIES : Teamcenter : find a way to avoid calling GetFolderUidToPathDict repeatedly
Issue #84295 (PROBLEM): PDM : PDMPROXIES : Teamcenter : support DocumentPath__ with ItemRevision and Dataset
Issue #84665 (PROBLEM): PDM : PDMPROXIES : SapWebSvc : add support for family table instances in query result list
Issue #85087 (PROBLEM): PLMsync/Vault: Creating a new version adds a second dwf to the latest version
Issue #85089 (PROBLEM): PLMsync/Vault: Instances not expanded to full generic if cached previously
Issue #87149 (PROBLEM): PDM : PDMPROXIES : SapWebSvc : new inventor version creates circular references > break
Issue #89369 (PROBLEM): PLMsync/all: Attribute handling is broken
Issue #91461 (PROBLEM): Import from Windchill to PARTdataManager does not work

Issue #34889 (ENHANCEMENT): Use pathtool for paths...

Issue #85179 (ENHANCEMENT): PDM : SapEctr : use embedded JT (like preview3D) instead of parasolid converter
Issue #85693 (ENHANCEMENT): PDM : SapEctr : Compare returns of ECTR 5.1.2 and 5.1.6 + adjust test output
Issue #92057 (PROBLEM): ifsapplm: Checkout of sheet metal part fails
Issue #92321 (PROBLEM): SapEctr : add material number truncation and expansion methods

Issue #93567 (ENHANCEMENT): Running customized SmarTeam scripts before checkin
Issue #93569 (ENHANCEMENT): SmarTeam.exe don't terminate after closing CATIA
Issue #93571 (ENHANCEMENT): Authentication Dialog not showing if User data are not enter in the CFG
Issue #89239 (PROBLEM): SMARTEAM/pdm proxy: QueryResult could be paged, depending on customer settings

Issue #83385 (PROBLEM): PDM : Teamcenter-Catia : use QT based XML tool for writing meta files

Issue #65909 (ENHANCEMENT): PDM : Teamcenter : Enhance Rollback object : add relations
Issue #84679 (ENHANCEMENT): PDM : SWIM : Use SACMI SavedSearch containing 3 different dependency references as default
Issue #60659 (PROBLEM): PDM : Teamcenter : improve support of IIOP connections
Issue #67267 (PROBLEM): PDM : Teamcenter : check object property policies with caching
Issue #67491 (PROBLEM): PDM : Teamcenter : check + solve caching problems
Issue #68937 (PROBLEM): PDM : PdmProxies : Teamcenter : fix localization problems
Issue #76597 (PROBLEM): PDM : Teamcenter : check what happens to session related objects on logout & re-login with new user
Issue #85401 (PROBLEM): PDM : Teamcenter : fix session related problems
Issue #90485 (PROBLEM): PDM : Teamcenter : find a way to terminate the Teamcenter server process
Issue #94179 (PROBLEM): PDM : Teamcenter : apply attribute mapping to all objects of a ModelObjectVector property

Issue #90197 (ENHANCEMENT): PDM : Teamcenter : Creo (IPEM)
Issue #84815 (PROBLEM): PDM : Teamcenter :Creo (IPEM) : remove outdated document version from Creo session

Issue #90481 (ENHANCEMENT): Create alternative representations (alt rep, Alternative representation) with PSOL and Teamcenter
Issue #89005 (PROBLEM): NX&Teamcenter: Error during new creation of assembly parts with existing components
Issue #90737 (PROBLEM): PDM TODO : Create alternative representations (alt rep, Alternative representation) with PSOL and Teamcenter
Issue #92433 (PROBLEM): Crash in AppAfterCreate when TC_useItemAltRep=0 but TC_ItemAltRepName is not empty
Issue #94195 (PROBLEM): According to ISSUE #94193 remove importFolder call

Issue #88991 (ENHANCEMENT): Vault 2018: Interface
Issue #92875 (ENHANCEMENT): Login dialog not translated
Issue #87423 (PROBLEM): Vault: Handle exception when the target folder is invalid

Issue #72847 (ENHANCEMENT): ifproepdmlink.cfg should be enhanced in order to see some keys in GUI
Issue #76765 (ENHANCEMENT): Error in Appaftercreate while checkin to Windchill 10
Issue #91159 (ENHANCEMENT): OSDM+WWGM: WWGM11 requires different Save workflow than WWGM10
Issue #78567 (PROBLEM): WWGM/Inventor: After Save, WWGM isn't adding the WWGM-required attributes
Issue #88009 (PROBLEM): PDM : Windchill : fix problem with search criteria containing equal sign(s) etc.
Issue #88715 (PROBLEM): When exporting a family table from Windchill into empty assembly in Creo, wrong instance is loaded
Issue #92971 (PROBLEM): PDM Windchill WGM F000 - failed to load ifwwgm DLL
Issue #93293 (PROBLEM): PDM : Windchill : fix invalid cfg key JSPPATH_CNS_CreateAndLinkWTPart

Zurück	Nach oben	Weiter
2.10.1.3.4. Bemaßungen ans CAD übergeben	Zum Anfang	2.11. V11.00 SP2